Administering the Monitoring Service
Previous Next Contents

8 Administering the Monitoring Service

This chapter explains how to monitor the GlassFish Server Open Source Edition 5.0 components and services by using the asadmin command-line utility. Instructions for configuring JConsole to monitor GlassFish Server resources are also provided.

The following topics are addressed here:

Instructions for monitoring by using the Administration Console are contained in the Administration Console online help.

For information on using REST interfaces for monitoring, see Using REST Interfaces to Administer GlassFish Server.

About Monitoring

Monitoring is the process of reviewing the statistics of a system to improve performance or solve problems. The monitoring service can track and display operational statistics, such as the number of requests per second, the average response time, and the throughput. By monitoring the state of various components and services deployed in GlassFish Server, you can identify performance bottlenecks, predict failures, perform root cause analysis, and ensure that everything is functioning as expected. Data gathered by monitoring can also be useful in performance tuning and capacity planning.

For this release of GlassFish Server, monitoring is exposed in a modular way so that many client modules can access and display the monitoring statistics. These clients include the Administration Console, the asadmin utility, AMX, and REST interfaces.

The following topics are addressed here:

How the Monitoring Tree Structure Works

A monitorable object is a component, subcomponent, or service that can be monitored. GlassFish Server uses a tree structure to track monitorable objects. Because the tree is dynamic, the tree changes as GlassFish Server components are added or removed.

In the tree, a monitorable object can have child objects (nodes) that represent exactly what can be monitored for that object. All child objects are addressed using the dot (.) character as a separator. These constructed names are referred to as dotted names. Detailed information on dotted names is available in the dotted-names(5ASC) help page.

The following command lists the monitorable child objects of the instance server:

asadmin> list --monitor "server.*"

server.applications
server.connector-service
server.http-service
server.jms-service
server.jvm
server.network
server.orb
server.resources
server.security
server.thread-pool
server.transaction-service
server.web

Each object is represented by a dotted name. Dotted names can also address specific attributes in monitorable objects. For example, the jvm object has a memory attribute with a statistic called maxheapsize. The following dotted name addresses the attribute:

server.jvm.memory.maxheapsize

Although an object is monitorable, it is not necessarily being actively monitored. For instructions on activating monitoring, see Configuring Monitoring.

Tree Structure of Monitorable Objects

Each monitorable object has a hierarchical tree structure. In the tree, a replaceable such as *statistics represents the name of the attribute that you can show statistics for.

The following node tree hierarchies are addressed here:

Applications Tree Hierarchy

The applications tree contains the following nodes:

server.applications
   |--- application1
   |    |--- ejb-module-1
   |    |        |--- ejb1 *
   |    |                  |--- bean-cache (for entity/sfsb) *
   |    |                  |--- bean-pool (for slsb/mdb/entity) *
   |    |                  |--- bean-methods
   |    |                       |---method1 *
   |    |                       |---method2 *
   |    |                  |--- timers (for s1sb/entity/mdb) *
   |    |--- web-module-1
   |    |        |--- virtual-server-1 *
   |    |                       |---servlet1  *
   |    |                       |---servlet2  *
   |--- standalone-web-module-1
   |    |        |----- virtual-server-2 *
   |    |                       |---servlet3 *
   |    |                       |---servlet4 *
   |    |        |----- virtual-server-3 *
   |    |                       |---servlet3 *(same servlet on different vs)
   |    |                       |---servlet5 *
   |--- standalone-ejb-module-1
   |    |        |--- ejb2 *
   |    |                  |--- bean-cache (for entity/sfsb) *
   |    |                  |--- bean-pool (for slsb/mdb/entity) *
   |    |                  |--- bean-methods
   |    |                       |--- method1 *
   |    |                       |--- method2 *
   |    |                  |--- timers (for s1sb/entity/mdb) *
   |--- jersey-application-1
   |    |--- jersey
   |    |        |--- resources
                           resource-0
                               hitcount
                                    *statistic
   |--- application2

An example dotted name might be:

server.applications.hello.server.request.maxtime

An example dotted name under the EJB method node might be:

server.applications.ejbsfapp1.ejbsfapp1ejbmod1\.jar.SFApp1EJB1

An example Jersey dotted name might be:

server.applications.helloworld-webapp.jersey.resources.resource-0.hitcount.resourcehitcount-count

For available statistics, see EJB Statistics, Jersey Statistics, and Web Statistics.

Connector Service Tree Hierarchy

The connector-service tree holds monitorable attributes for pools such as the connector connection pool. The connector-service tree contains the following nodes:

server.connector-service
        resource-adapter-1
             connection-pools
                  pool-1
             work-management

An example dotted name might be server.connector-service.resource-adapter-1.connection-pools.pool-1. For available statistics, see JMS/Connector Service Statistics.

HTTP Service Tree Hierarchy

The http-service tree contains the following nodes:

server.http-service
       virtual-server
           request
               *statistic
       _asadmin
           request
               *statistic

An example dotted name under the virutal-server node might be server.http-service.virtual-server1.request.requestcount. For available statistics, see HTTP Service Statistics.

JMS/Container Service Tree Hierarchy

The jms-service tree holds monitorable attributes for connection factories (connection pools for resource adapters) and work management (for Message Queue resource adapters). The jms-service tree contains the following nodes:

server.jms-service
        connection-factories
             connection-factory-1
        work-management

An example dotted name under the connection-factories node might be server.jms-service.connection-factories.connection-factory-1 which shows all the statistics for this connection factory. For available statistics, see JMS/Connector Service Statistics.

JVM Tree Hierarchy

The jvm tree contains the following nodes:

server.jvm
           class-loading-system
           compilation-system
           garbage-collectors
           memory
           operating-system
           runtime

An example dotted name under the memory node might be server.jvm.memory.maxheapsize. For available statistics, see JVM Statistics.

Network Tree Hierarchy

The network statistics apply to the network listener, such as admin-listener, http-listener-1, ttp-listener-2. The network tree contains the following nodes:

server.network
          type-of-listener
              keep-alive
                    *statistic
              file-cache
                    *statistic
              thread-pool
                    *statistic
              connection-queue
                     *statistic

An example dotted name under the network node might be server.network.admin-listener.keep-alive.maxrequests-count. For available statistics, see Network Statistics.

ORB Tree Hierarchy

The orb tree holds monitorable attributes for connection managers. The orb tree contains the following nodes:

server.orb
    transport
        connectioncache
            inbound
                *statistic
            outbound
                *statistic

An example dotted name might be server.orb.transport.connectioncache.inbound.connectionsidle-count. For available statistics, see ORB Statistics (Connection Manager).

Resources Tree Hierarchy

The resources tree holds monitorable attributes for pools such as the JDBC connection pool and connector connection pool. The resources tree contains the following nodes:

server.resources
       connection-pool
           request
               *statistic

An example dotted name might be server.resources.jdbc-connection-pool1.numconnfree.count. For available statistics, see Resource Statistics (Connection Pool).

Security Tree Hierarchy

The security tree contains the following nodes:

server.security
       ejb
          *statistic
       web
          *statistic
       realm
          *statistic

An example dotted name might be server.security.realm.realmcount-starttime. For available statistics, see Security Statistics.

Thread Pool Tree Hierarchy

The thread-pool tree holds monitorable attributes for connection managers, and contains the following nodes:

server.thread-pool
                orb
                    threadpool
                            thread-pool-1
                                *statistic

An example dotted name might be server.thread-pool.orb.threadpool.thread-pool-1.averagetimeinqueue-current. For available statistics, see Thread Pool Statistics.

Transactions Service Tree Hierarchy

The transaction-service tree holds monitorable attributes for the transaction subsystem for the purpose of rolling back transactions. The transaction-service tree contains the following nodes:

server.transaction-service
         statistic

An example dotted name might be server.tranaction-service.activeids. For available statistics, see Transaction Service Statistics.

Web Tree Hierarchy

The web tree contains the following nodes:

server.web
           jsp
              *statistic
           servlet
              *statistic
           session
              *statistic
           request
              *statistic

An example dotted name for the servlet node might be server.web.servlet.activeservletsloadedcount. For available statistics, see Web Module Common Statistics.

About Monitoring for Add-on Components

An add-on component typically generates statistics that GlassFish Server can gather at runtime. Adding monitoring capabilities enables an add-on component to provide statistics to GlassFish Server in the same way as components that are supplied in the GlassFish Server distributions. As a result, you can use the same administrative interfaces to monitor statistics from any installed GlassFish Server component, regardless of the origin of the component.

Tools for Monitoring GlassFish Server

The following asadmin subcommands are provided for monitoring the services and components of GlassFish Server:

Configuring Monitoring

By default, the monitoring service is enabled for GlassFish Server, but monitoring for the individual modules is not. To enable monitoring for a module, you change the monitoring level for that module to LOW or HIGH, You can choose to leave monitoring OFF for objects that do not need to be monitored.

  • LOW. Simple statistics, such as create count, byte count, and so on

  • HIGH. Simple statistics plus method statistics, such as method count, duration, and so on

  • OFF. No monitoring, no impact on performance

The following tasks are addressed here:

To Enable Monitoring

Use the enable-monitoring subcommand to enable the monitoring service itself, or to enable monitoring for individual modules. Monitoring is immediately activated, without restarting GlassFish Server.

You can also use the set subcommand to enable monitoring for a module. Using the set command is not a dynamic procedure, so you need to restart GlassFish Server for your changes to take effect.

  1. Determine which services and components are currently enabled for monitoring.

asadmin> get server.monitoring-service.module-monitoring-levels.*

This example output shows that the HTTP service is not enabled (OFF for monitoring), but other objects are enabled:

configs.config.server-config.monitoring-service.module-monitoring-levels.web-container=HIGH
       configs.config.server-config.monitoring-service.module-monitoring-levels.http-service=OFF
           configs.config.server-config.monitoring-service.module-monitoring-levels.jvm=HIGH

  1. Enable monitoring by using the oenable-monitoring subcommand.
    Server restart is not required.

Example 8-1 Enabling the Monitoring Service Dynamically

This example enables the monitoring service without affecting monitoring for individual modules.

asadmin> enable-monitoring
Command enable-monitoring executed successfully

Example 8-2 Enabling Monitoring for Modules Dynamically

This example enables monitoring for the ejb-container module.

asadmin> enable-monitoring --level ejb-container=HIGH
Command enable-monitoring executed successfully

Example 8-3 Enabling Monitoring for Modules by Using the set Subcommand

This example enables monitoring for the HTTP service by setting the monitoring level to HIGH (you must restart the server for changes to take effect).

asadmin> set server.monitoring-service.module-monitoring-levels.http-service=HIGH
Command set executed successfully

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help enable-monitoring at the command line.

To Disable Monitoring

Use the disable-monitoring subcommand to disable the monitoring service itself, or to disable monitoring for individual modules. Monitoring is immediately stopped, without restarting GlassFish Server.

You can also use the set subcommand to disable monitoring for a module. Using the set command is not a dynamic procedure, so you need to restart GlassFish Server for your changes to take effect.

  1. Determine which services and components currently are enabled for monitoring.

asadmin get server.monitoring-service.module-monitoring-levels.*

This example output shows that monitoring is enabled for web-container, http-service, and jvm:

configs.config.server-config.monitoring-service.module-monitoring-levels.web-container=HIGH
       configs.config.server-config.monitoring-service.module-monitoring-levels.http-service=HIGH
              configs.config.server-config.monitoring-service.module-monitoring-levels.jvm=HIGH

  1. Disable monitoring for a service or module by using the disable-monitoring subcommand.
    Server restart is not required.

Example 8-4 Disabling the Monitoring Service Dynamically

This example disables the monitoring service without changing the monitoring levels for individual modules.

asadmin> disable-monitoring
Command disable-monitoring executed successfully

Example 8-5 Disabling Monitoring for Modules Dynamically

This example disables monitoring for specific modules. Their monitoring levels are set to OFF.

asadmin> disable-monitoring --modules web-container,ejb-container
Command disable-monitoring executed successfully

Example 8-6 Disabling Monitoring by Using the set Subcommand

This example disables monitoring for the HTTP service (you must restart the server for changes to take effect).

asadmin> set server.monitoring-service.module-monitoring-levels.http-service=OFF
Command set executed successfully

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help disable-monitoring at the command line.

Viewing Common Monitoring Data

Use the monitor subcommand to display basic data on commonly-monitored objects.

To View Common Monitoring Data

Use the --type option of the monitor subcommand to specify the object for which you want to display data, such as httplistener, jvm, webmodule. If you use the monitor subcommand without specifying a type, an error message is displayed.

Output from the subcommand is displayed continuously in a tabular format. The --interval option can be used to display output at a particular interval (the default is 30 seconds).

Before You Begin

A monitorable object must be configured for monitoring before you can display data on the object. See To Enable Monitoring.

  1. Determine which type of monitorable object you want to monitor.
    Your choices for 5.0 are jvm, httplistener, and webmodule.

  2. Request the monitoring data by using the monitor subcommand.

Example 8-7 Viewing Common Monitoring Data

This example requests common data for type jvm on instance server.

asadmin> monitor --type jvm server

UpTime(ms)                          Heap and NonHeap Memory(bytes)
current                   min        max        low        high       count

9437266                   8585216    619642880  0          0          93093888
9467250                   8585216    619642880  0          0          93093888

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help monitor at the command line.

Common Monitoring Statistics

Common monitoring statistics are described in the following sections:

HTTP Listener Common Statistics

The statistics available for the httplistener type are shown in the following table.

Table 8-1 HTTP Listener Common Monitoring Statistics

Statistic Description

ec

Error count. Cumulative value of the error count

mt

Maximum time. Longest response time for a request; not a cumulative value, but the largest response time from among the response times

pt

Processing time. Cumulative value of the times taken to process each request, with processing time being the average of request processing times over request

rc

Request count. Cumulative number of requests processed so far

JVM Common Statistics

The statistics available for the jvm type are shown in the following table.

Table 8-2 JVM Common Monitoring Statistics

Statistic Description

count

Amount of memory (in bytes) that is guaranteed to be available for use by the JVM machine

high

Retained for compatibility with other releases

low

Retained for compatibility with other releases

max

The maximum amount of memory that can be used for memory management.

min

Initial amount of memory (in bytes) that the JVM machine requests from the operating system for memory management during startup

UpTime

Number of milliseconds that the JVM machine has been running since it was last started

Web Module Common Statistics

The statistics available for the webmodule type are shown in the following table.

Table 8-3 Web Module Common Monitoring Statistics

Statistic Description

ajlc

Number of active JavaServer Pages (JSP) technology pages that are loaded

asc

Current active sessions

aslc

Number of active servlets that are loaded

ast

Total active sessions

mjlc

Maximum number of JSP pages that are loaded

mslc

Maximum number of servlets that are loaded

rst

Total rejected sessions

st

Total sessions

tjlc

Total number of JSP pages that are loaded

tslc

Total number of servlets that are loaded

Viewing Comprehensive Monitoring Data

By applying the list and get subcommands against the tree structure using dotted names, you can display more comprehensive monitoring data, such as a description of each of the statistics and its unit of measurement.

The following topics are addressed here:

Guidelines for Using the list and get Subcommands for Monitoring

The underlying assumptions for using the list and get subcommands with dotted names are:

  • A list subcommand that specifies a dotted name that is not followed by a wildcard (*) lists the current node’s immediate children. For example, the following subcommand lists all immediate children belonging to the server node:

list --monitor server

  • A list subcommand that specifies a dotted name followed by a wildcard of the form .* lists a hierarchical tree of child nodes from the specified node. For example, the following subcommand lists all children of the applications node, their subsequent child nodes, and so on:

list --monitor server.applications.*

  • A list subcommand that specifies a dotted name preceded or followed by a wildcard of the form *dottedname or dotted * name or dottedname * lists all nodes and their children that match the regular expression created by the specified matching pattern.

  • A get subcommand followed by a .* or a * gets the set of attributes and their values that belong to the node specified.

For example, the following table explains the output of the list and get subcommands used with the dotted name for the resources node.

Table 8-4 Example Resources Level Dotted Names

Subcommand Dotted Name Output

list --monitor

server.resources

List of pool names.

list --monitor

server.resources.``connection-pool1

No attributes, but a message saying "Use get subcommand with the --monitor option to view this node’s attributes and values."

get --monitor

server.resources.``connection-pool1.*

List of attributes and values corresponding to connection pool attributes.

For detailed information on dotted names, see the dotted-names(5ASC) help page.

To View Comprehensive Monitoring Data

Although the monitor subcommand is useful in many situations, it does not offer the complete list of all monitorable objects. To work with comprehensive data for an object type, use the list monitor and the get monitor subcommands followed by the dotted name of a monitorable object.

Before You Begin

A monitorable object must be configured for monitoring before you can display information about the object. See To Enable Monitoring if needed.

  1. List the objects that are enabled for monitoring by using the list subcommand.
    For example, the following subcommand lists all components and services that have monitoring enabled for instance server.

asadmin> list --monitor "*"
server.web
server.connector-service
server.orb
server.jms-serviceserver.jvm
server.applications
server.http-service
server.thread-pools

  1. Get data for a monitored component or service by using the get subcommand.

Example 8-8 Viewing Attributes for a Specific Type

This example gets information about all the attributes for object type jvm on instance server.

asadmin> get --monitor server.jvm.*
server.jvm.class-loading-system.loadedclasscount = 3715
server.jvm.class-loading-system.totalloadedclasscount = 3731
server.jvm.class-loading-system.unloadedclasscount = 16
server.jvm.compilation-system.name-current = HotSpot Client Compiler
server.jvm.compilation-system.totalcompilationtime = 769
server.jvm.garbage-collectors.Copy.collectioncount = 285
server.jvm.garbage-collectors.Copy.collectiontime = 980
server.jvm.garbage-collectors.MarkSweepCompact.collectioncount = 2
server.jvm.garbage-collectors.MarkSweepCompact.collectiontime = 383
server.jvm.memory.committedheapsize = 23498752
server.jvm.memory.committednonheapsize = 13598720
server.jvm.memory.initheapsize = 0
server.jvm.memory.initnonheapsize = 8585216
server.jvm.memory.maxheapsize = 66650112
server.jvm.memory.maxnonheapsize = 100663296
server.jvm.memory.objectpendingfinalizationcount = 0
server.jvm.memory.usedheapsize = 19741184
server.jvm.memory.usednonheapsize = 13398352
server.jvm.operating-system.arch-current = x86
server.jvm.operating-system.availableprocessors = 2
server.jvm.operating-system.name-current = Windows XP
server.jvm.operating-system.version-current = 5.1
server.jvm.runtime.classpath-current = glassfish.jar
server.jvm.runtime.inputarguments-current = []
server.jvm.runtime.managementspecversion-current = 1.0
server.jvm.runtime.name-current = 4372@ABBAGANI_WORK
server.jvm.runtime.specname-current = Java Virtual Machine Specification
server.jvm.runtime.specvendor-current = Sun Microsystems Inc.
server.jvm.runtime.specversion-current = 1.0
server.jvm.runtime.uptime = 84813
server.jvm.runtime.vmname-current = Java HotSpot(TM) Client VM
server.jvm.runtime.vmvendor-current = Sun Microsystems Inc.
server.jvm.runtime.vmversion-current = 1.5.0_11-b03

Example 8-9 Viewing Monitorable Applications

This example lists all the monitorable applications for instance server.

asadmin> list --monitor server.applications.*
server.applications.app1
server.applications.app2
server.applications.app1.virtual-server1
server.applications.app2.virtual-server1

Example 8-10 Viewing Attributes for an Application

This example gets information about all the attributes for application hello.

asadmin> get --monitor server.applications.hello.*
server.applications.hello.server.activatedsessionstotal = 0
server.applications.hello.server.activejspsloadedcount = 1
server.applications.hello.server.activeservletsloadedcount = 1
server.applications.hello.server.activesessionscurrent = 1
server.applications.hello.server.activesessionshigh = 1
server.applications.hello.server.errorcount = 0
server.applications.hello.server.expiredsessionstotal = 0
server.applications.hello.server.maxjspsloadedcount = 1
server.applications.hello.server.maxservletsloadedcount = 0
server.applications.hello.server.maxtime = 0
server.applications.hello.server.passivatedsessionstotal = 0
server.applications.hello.server.persistedsessionstotal = 0
server.applications.hello.server.processingtime = 0.0
server.applications.hello.server.rejectedsessionstotal = 0
server.applications.hello.server.requestcount = 0
server.applications.hello.server.sessionstotal =
server.applications.hello.server.totaljspsloadedcount = 0
server.applications.hello.server.totalservletsloadedcount = 0

Example 8-11 Viewing a Specific Attribute

This example gets information about the jvm attribute runtime.vmversion-current on instance server.

asadmin> get --monitor server.jvm.runtime.vmversion-current
server.jvm.runtime.vmversion-current = 10.0-b23

Comprehensive Monitoring Statistics

You can get comprehensive monitoring statistics by forming a dotted name that specifies the statistic you are looking for. For example, the following dotted name will display the cumulative number of requests for the HTTP service on virtual-server1:

server.http-service.virtual-server1.request.requestcount

The tables in the following sections list the statistics that are available for each monitorable object:

EJB Statistics

EJBs fit into the tree of objects as shown in Applications Tree Hierarchy. Use the following dotted name pattern to get EJB statistics for an application:

server.applications.appname.ejbmodulename.ejbname.bean-cache.statistic
Note

EJB statistics for an application are available after the application is executed. If the application is deployed but has not yet been executed, all counts will show default values. When the application is undeployed, all its monitoring data is lost.

Statistics available for applications are shown in the following sections:

EJB Cache Statistics

Use the following dotted name pattern for EJB cache statistics:

server.applications.appname.ejbmodulename.bean-cache.ejbname.statistic

The statistics available for EJB caches are listed in the following table.

Table 8-5 EJB Cache Monitoring Statistics

Statistic Data Type Description

cachemisses

RangeStatistic

The number of times a user request does not find a bean in the cache.

cachehits

RangeStatistic

The number of times a user request found an entry in the cache.

numbeansincache

RangeStatistic

The number of beans in the cache. This is the current size of the cache.

numpassivations

CountStatistic

Number of passivated beans. Applies only to stateful session beans.

numpassivationerrors

CountStatistic

Number of errors during passivation. Applies only to stateful session beans.

numexpiredsessionsremoved

CountStatistic

Number of expired sessions removed by the cleanup thread. Applies only to stateful session beans.

numpassivationsuccess

CountStatistic

Number of times passivation completed successfully. Applies only to stateful session beans.

EJB Container Statistics

Use the following dotted name pattern for EJB container statistics:

server.applications.appname.ejbmodulename.container.ejbname

The statistics available for EJB containers are listed in the following table.

Table 8-6 EJB Container Monitoring Statistics

Statistic Data Type Description

createcount

CountStatistic

Number of times an EJB’s create method is called.

messagecount

CountStatistic

Number of messages received for a message-driven bean.

methodreadycount

RangeStatistic

Number of stateful or stateless session beans that are in the MethodReady state.

passivecount

RangeStatistic

Number of stateful session beans that are in Passive state.

pooledcount

RangeStatistic

Number of entity beans in pooled state.

readycount

RangeStatistic

Number of entity beans in ready state.

removecount

CountStatistic

Number of times an EJB’s remove method is called.

EJB Method Statistics

Use the following dotted name pattern for EJB method statistics:

server.applications.appname.ejbmodulename.bean-methods.ejbname.statistic

The statistics available for EJB method invocations are listed in the following table.

Table 8-7 EJB Method Monitoring Statistics

Statistic Data Type Description

executiontime

CountStatistic

Time, in milliseconds, spent executing the method for the last successful/unsuccessful attempt to run the operation. This is collected for stateless and stateful session beans and entity beans if monitoring is enabled on the EJB container.

methodstatistic

TimeStatistic

Number of times an operation is called; the total time that is spent during the invocation, and so on.

totalnumerrors

CountStatistic

Number of times the method execution resulted in an exception. This is collected for stateless and stateful session beans and entity beans if monitoring is enabled for the EJB container.

totalnumsuccess

CountStatistic

Number of times the method successfully executed. This is collected for stateless and stateful session beans and entity beans if monitoring enabled is true for EJB container.

EJB Pool Statistics

Use the following dotted name pattern for EJB pool statistics:

server.applications.appname.ejbmodulename.bean-pool.ejbname.statistic

The statistics available for EJB pools are listed in the following table.

Table 8-8 EJB Pool Monitoring Statistics

Statistic Data Type Description

jmsmaxmessagesload

CountStatistic

The maximum number of messages to load into a JMS session at one time for a message-driven bean to serve. Default is 1. Applies only to pools for message driven beans.

numbeansinpool

RangeStatistic

Number of EJBs in the associated pool, providing information about how the pool is changing.

numthreadswaiting

RangeStatistic

Number of threads waiting for free beans, giving an indication of possible congestion of requests.

totalbeanscreated

CountStatistic

Number of beans created in associated pool since the gathering of data started.

totalbeansdestroyed

CountStatistic

Number of beans destroyed from associated pool since the gathering of data started.

Timer Statistics

Use the following dotted name pattern for timer statistics:

server.applications.appname.ejbmodulename.timers.ejbname.statistic

The statistics available for timers are listed in the following table.

Table 8-9 Timer Monitoring Statistics

Statistic Data Type Description

numtimerscreated

CountStatistic

Number of timers created in the system.

numtimersdelivered

CountStatistic

Number of timers delivered by the system.

numtimersremoved

CountStatistic

Number of timers removed from the system.

HTTP Service Statistics

The HTTP service fits into the tree of objects as shown in HTTP Service Tree Hierarchy.

HTTP Service Virtual Server Statistics

Use the following dotted name pattern for HTTP service virtual server statistics:

server.http-service.virtual-server.request.statistic

The HTTP service statistics for virtual servers are shown in the following table.

Table 8-10 HTTP Service Virtual Server Monitoring Statistics

Statistic Data Type Description

count200

CountStatistic

Number of responses with a status code equal to 200

count2xx

CountStatistic

Number of responses with a status code in the 2xx range

count302

CountStatistic

Number of responses with a status code equal to 302

count304

CountStatistic

Number of responses with a status code equal to 304

count3xx

CountStatistic

Number of responses with a status code equal in the 3xx range

count400

CountStatistic

Number of responses with a status code equal to 400

count401

CountStatistic

Number of responses with a status code equal to 401

count403

CountStatistic

Number of responses with a status code equal to 403

count404

CountStatistic

Number of responses with a status code equal to 404

count4xx

CountStatistic

Number of responses with a status code equal in the 4xx range

count503

CountStatistic

Number of responses with a status code equal to 503

count5xx

CountStatistic

Number of responses with a status code equal in the 5xx range

countother

CountStatistic

Number of responses with a status code outside the 2xx, 3xx, 4xx, and 5xx range

errorcount

CountStatistic

Cumulative value of the error count, with error count representing the number of cases where the response code was greater than or equal to 400

hosts

StringStatistic

The host (alias) names of the virtual server

maxtime

CountStatistic

Longest response time for a request; not a cumulative value, but the largest response time from among the response times

processingtime

CountStatistic

Cumulative value of the times taken to process each request, with processing time being the average of request processing times over the request count

requestcount

CountStatistic

Cumulative number of requests processed so far

state

StringStatistic

The state of the virtual server

Jersey Statistics

Jersey fits into the tree of objects as shown in Applications Tree Hierarchy.

Use the following dotted name pattern for Jersey statistics:

server.applications.jersey-application.jersey.resources.resource-0.hitcount.statistic

The statistics available for Jersey are shown in the following table.

Table 8-11 Jersey Statistics

Statistic Data Type Description

resourcehitcount

CountStatistic

Number of hits on this resource class

rootresourcehitcount

CountStatistic

Number of hits on this root resource class

JMS/Connector Service Statistics

The JMS/Connector Service fits into the tree of objects as shown in JMS/Container Service Tree Hierarchy.

JMS/Connector Service statistics are shown in the following sections:

Connector Connection Pool Statistics (JMS)

Use the following dotted name pattern for JMS/Connector Service connection pool statistics:

server.connector-service.resource-adapter-1.connection-pool.statistic

JMS/Connector Service statistics available for the connector connection pools are shown in the following table.

Note

In order to improve system performance, connection pools are initialized lazily; that is, a pool is not initialized until an application first uses the pool or the pool is explicitly pinged. Monitoring statistics for a connection pool are not available until the pool is initialized.

Table 8-12 Connector Connection Pool Monitoring Statistics (JMS)

Statistic Data Type Description

averageconnwaittime

CountStatistic

Average wait time of connections before they are serviced by the connection pool.

connectionrequestwaittime

RangeStatistic

The longest and shortest wait times of connection requests. The current value indicates the wait time of the last request that was serviced by the pool.

numconnfailedvalidation

CountStatistic

Total number of connections in the connection pool that failed validation from the start time until the last sample time.

numconnused

RangeStatistic

Total number of connections that are currently being used, as well as information about the maximum number of connections that were used (the high water mark).

numconnfree

RangeStatistic

Total number of free connections in the pool as of the last sampling.

numconntimedout

CountStatistic

Total number of connections in the pool that timed out between the start time and the last sample time.

numconncreated

CountStatistic

Number of physical connections, in milliseconds, that were created since the last reset.

numconndestroyed

CountStatistic

Number of physical connections that were destroyed since the last reset.

numconnacquired

CountStatistic

Number of logical connections acquired from the pool.

numconnreleased

CountStatistic

Number of logical connections released to the pool.

waitqueuelenght

CountStatistic

Number of connection requests in the queue waiting to be serviced.

Connector Work Management Statistics (JMS)

Use the following dotted name pattern for JMS/Connector Service work management statistics:

server.connector-service.resource-adapter-1.work-management.statistic

JMS/Connector Service statistics available for connector work management are listed in the following table.

Table 8-13 Connector Work Management Monitoring Statistics (JMS)

Statistic Data Type Description

activeworkcount

RangeStatistic

Number of work objects executed by the connector.

completedworkcount

CountStatistic

Number of work objects that were completed.

rejectedworkcount

CountStatistic

Number of work objects rejected by the GlassFish Server.

submittedworkcount

CountStatistic

Number of work objects submitted by a connector module.

waitqueuelength

RangeStatistic

Number of work objects waiting in the queue before executing.

workrequestwaittime

RangeStatistic

Longest and shortest wait of a work object before it gets executed.

JVM Statistics

The JVM fits into the tree of objects as show in JVM Tree Hierarchy.

The statistics that are available for the Virtual Machine for Java platform (Java Virtual Machine) or JVM machine are shown in the following sections:

JVM Class Loading System Statistics

Use the following dotted name pattern for JVM class loading system statistics:

server.jvm.class-loading-system.statistic

With Java SE, additional monitoring information can be obtained from the JVM. Set the monitoring level to LOW to enable the display of this additional information. Set the monitoring level to HIGH to also view information pertaining to each live thread in the system. More information about the additional monitoring features for Java SE is available in Monitoring and Management for the Java Platform .

The Java SE monitoring tools are discussed at http://docs.oracle.com/javase/8/docs/technotes/tools/.

The statistics that are available for class loading in the JVM for Java SE are shown in the following table.

Table 8-14 JVM Monitoring Statistics for Java SE Class Loading

Statistic Data Type Description

loadedclasscount

CountStatistic

Number of classes that are currently loaded in the JVM

totalloadedclasscount

CountStatistic

Total number of classes that have been loaded since the JVM began execution

unloadedclasscount

CountStatistic

Number of classes that have been unloaded from the JVM since the JVM began execution

The statistics available for threads in the JVM in Java SE are shown in the following table.

Table 8-15 JVM Monitoring Statistics for Java SE - Threads

Statistic Data Type Description

allthreadids

StringStatistic

List of all live thread ids.

currentthreadcputime

CountStatistic

CPU time for the current thread (in nanoseconds) if CPU time measurement is enabled. If CPU time measurement is disabled, returns -1.

daemonthreadcount

CountStatistic

Current number of live daemon threads.

monitordeadlockedthreads

StringStatistic

List of thread ids that are monitor deadlocked.

peakthreadcount

CountStatistic

Peak live thread count since the JVM started or the peak was reset.

threadcount

CountStatistic

Current number of live daemon and non-daemon threads.

totalstartedthreadcount

CountStatistic

Total number of threads created and/or started since the JVM started.

JVM Compilation System Statistics

Use the following dotted name pattern for JVM compilation system statistics:

server.jvm.compilation-system.statistic

The statistics that are available for compilation in the JVM for Java SE are shown in the following table.

Table 8-16 JVM Monitoring Statistics for Java SE Compilation

Statistic Data Type Description

name-current

StringStatistic

Name of the current compiler

totalcompilationtime

CountStatistic

Accumulated time (in milliseconds) spent in compilation

JVM Garbage Collectors Statistics

Use the following dotted name pattern for JVM garbage collectors statistics:

server.jvm.garbage-collectors.statistic

The statistics that are available for garbage collection in the JVM for Java SE are shown in the following table.

Table 8-17 JVM Monitoring Statistics for Java SE Garbage Collectors

Statistic Data Type Description

collectioncount

CountStatistic

Total number of collections that have occurred

collectiontime

CountStatistic

Accumulated time (in milliseconds) spent in collection

JVM Memory Statistics

Use the following dotted name pattern for JVM memory statistics:

server.jvm.memory.statistic

The statistics that are available for memory in the JVM for Java SE are shown in the following table.

Table 8-18 JVM Monitoring Statistics for Java SE Memory

Statistic Data Type Description

committedheapsize

CountStatistic

Amount of heap memory (in bytes) that is committed for the JVM to use

committednonheapsize

CountStatistic

Amount of non-heap memory (in bytes) that is committed for the JVM to use

initheapsize

CountStatistic

Size of the heap initially requested by the JVM

initnonheapsize

CountStatistic

Size of the non-heap area initially requested by the JVM

maxheapsize

CountStatistic

Maximum amount of heap memory (in bytes) that can be used for memory management

maxnonheapsize

CountStatistic

Maximum amount of non-heap memory (in bytes) that can be used for memory management

objectpendingfinalizationcount

CountStatistic

Approximate number of objects that are pending finalization

usedheapsize

CountStatistic

Size of the heap currently in use

usednonheapsize

CountStatistic

Size of the non-heap area currently in use

JVM Operating System Statistics

Use the following dotted name pattern for JVM operating system statistics:

server.jvm.operating-system.statistic

The statistics that are available for the operating system for the JVM machine in Java SE are shown in the following table.

Table 8-19 JVM Statistics for the Java SE Operating System

Statistic Data Type Description

arch-current

StringStatistic

Operating system architecture

availableprocessors

CountStatistic

Number of processors available to the JVM

name-current

StringStatistic

Operating system name

version-current

StringStatistic

Operating system version

JVM Runtime Statistics

Use the following dotted name pattern for JVM runtime statistics:

server.jvm.runtime.statistic

The statistics that are available for the runtime in the JVM runtime for Java SE are shown in the following table.

Table 8-20 JVM Monitoring Statistics for Java SE Runtime

Statistic Data Type Description

classpath-current

StringStatistic

Classpath that is used by the system class loader to search for class files

inputarguments-current

StringStatistic

Input arguments passed to the JVM; not including arguments to the main method

managementspecversion-current

StringStatistic

Management specification version implemented by the JVM

name-current

StringStatistic

Name representing the running JVM

specname-current

StringStatistic

JVM specification name

specvendor-current

StringStatistic

JVM specification vendor

specversion-current

StringStatistic

JVM specification version

uptime

CountStatistic

Uptime of the JVM (in milliseconds)

vmname-current

StringStatistic

JVM implementation name

vmvendor-current

StringStatistic

JVM implementation vendor

vmversion-current

StringStatistic

JVM implementation version

Network Statistics

Network fits into the tree of objects as shown in Network Tree Hierarchy.

Network statistics are described in the following sections:

Network Keep Alive Statistics

Use the following dotted name pattern for network keep alive statistics:

server.network.type-of-listener.keep-alive.statistic

Statistics available for network keep alive are shown in the following table.

Table 8-21 Network Keep Alive Statistics

Statistic Data Type Description

countconnections

CountStatistic

Number of connections in keep-alive mode.

counttimeouts

CountStatistic

Number of keep-alive connections that timed out.

secondstimeouts

CountStatistic

Keep-alive timeout value in seconds.

maxrequests

CountStatistic

Maximum number of requests allowed on a single keep-alive connection.

countflushes

CountStatistic

Number of keep-alive connections that were closed.

counthits

CountStatistic

Number of requests received by connections in keep-alive mode.

countrefusals

CountStatistic

Number of keep-alive connections that were rejected.

Network Connection Queue Statistics

Use the following dotted name pattern for network connection queue statistics:

server.network.type-of-listener.connection-queue.statistic

Statistics available for network connection queue are shown in the following table.

Table 8-22 Network Connection Queue Statistics

Statistic Data Type Description

countopenconnections

CountStatistic

The number of open/active connections

countoverflows

CountStatistic

Number of times the queue has been too full to accommodate a connection

countqueued

CountStatistic

Number of connections currently in the queue

countqueued15minutesaverage

CountStatistic

Average number of connections queued in the last 15 minutes

countqueued1minuteaverage

CountStatistic

Average number of connections queued in the last 1 minute

countqueued5minutesaverage

CountStatistic

Average number of connections queued in the last 5 minutes

counttotalconnections

CountStatistic

Total number of connections that have been accepted

counttotalqueued

CountStatistic

Total number of connections that have been queued

maxqueued

CountStatistic

Maximum size of the connection queue

peakqueued

CountStatistic

Largest number of connections that were in the queue simultaneously

tickstotalqueued

CountStatistic

(Unsupported) Total number of ticks that connections have spent in the queue

Network File Cache Statistics

Use the following dotted name pattern for network file cache statistics:

server.network.type-of-listener.file-cache.statistic

Statistics available for network file cache are shown in the following table.

Table 8-23 Network File Cache Statistics

Statistic Data Type Description

contenthits

CountStatistic

Number of hits on cached file content

contentmisses

CountStatistic

Number of misses on cached file content

heapsize

CountStatistic

Current cache size in bytes

hits

CountStatistic

Number of cache lookup hits

infohits

CountStatistic

Number of hits on cached file info

infomisses

CountStatistic

Number of misses on cached file info

mappedmemorysize

CountStatistic

Size of mapped memory used for caching in bytes

maxheapsize

CountStatistic

Maximum heap space used for cache in bytes

maxmappedmemorysize

CountStatistic

Maximum memory map size used for caching in bytes

misses

CountStatistic

Number of cache lookup misses data type

opencacheentries

CountStatistic

Number of current open cache entries

Network Thread Pool Statistics

Use the following dotted name pattern for network thread pool statistics:

server.network.type-of-listener.thread-pool.statistic

Statistics available for network thread pool are shown in the following table.

Table 8-24 Network Thread Pool Statistics

Statistic Data Type Description

corethreads

CountStatistic

Core number of threads in the thread pool

currentthreadcount

CountStatistic

Provides the number of request processing threads currently in the listener thread pool

currentthreadsbusy

CountStatistic

Provides the number of request processing threads currently in use in the listener thread pool serving requests

maxthreads

CountStatistic

Maximum number of threads allowed in the thread pool

totalexecutedtasks

CountStatistic

Provides the total number of tasks, which were executed by the thread pool

ORB Statistics (Connection Manager)

The ORB fits into the tree of objects as shown in ORB Tree Hierarchy.

Use the following dotted name patterns for ORB statistics:

server.orb.transport.connectioncache.inbound.statistic
server.orb.transport.connectioncache.outbound.statistic

The statistics available for the connection manager in an ORB are listed in the following table.

Table 8-25 ORB Monitoring Statistics (Connection Manager)

Statistic Data Type Description

connectionsidle

CountStatistic

Total number of connections that are idle to the ORB

connectionsinuse

CountStatistic

Total number of connections in use to the ORB

totalconnections

BoundedRangeStatistic

Total number of connections to the ORB

Resource Statistics (Connection Pool)

By monitoring connection pool resources you can measure performance and capture resource usage at runtime. Connections are expensive and frequently cause performance bottlenecks in applications. It is important to monitor how a connection pool is releasing and creating new connections and how many threads are waiting to retrieve a connection from a particular pool.

The connection pool resources fit into the tree of objects as shown in Resources Tree Hierarchy.

Use the following dotted name pattern for general connection pool statistics:

server.resources.pool-name.statistic

Use the following dotted name pattern for application-scoped connection pool statistics:

server.applications.application-name.resources.pool-name.statistic

Use the following dotted name pattern for module-scoped connection pool statistics:

server.applications.application-name.module-name.resources.pool-name.statistic

The connection pool statistics are shown in the following tables.

Note

In order to improve system performance, connection pools are initialized lazily; that is, a pool is not initialized until an application first uses the pool or the pool is explicitly pinged. Monitoring statistics for a connection pool are not available until the pool is initialized.

Table 8-26 General Resource Monitoring Statistics (Connection Pool)

Statistic Data Type Description

averageconnwaittime

CountStatistic

Average wait-time-duration per successful connection request

connrequestwaittime

RangeStatistic

Longest and shortest wait times, in milliseconds, of connection requests since the last sampling. current value indicates the wait time of the last request that was serviced by the pool

numconnacquired

CountStatistic

Number of logical connections acquired from the pool since the last sampling

numconncreated

CountStatistic

Number of physical connections that were created by the pool since the last reset

numconndestroyed

CountStatistic

Number of physical connections that were destroyed since the last reset

numconnfailedvalidation

CountStatistic

Number of connections in the connection pool that failed validation from the start time until the last sampling time

numconnfree

RangeStatistic

Number of free connections in the pool as of the last sampling

numconnnotsuccessfullymatched

CountStatistic

Number of connections rejected during matching

numconnreleased

CountStatistic

Number of connections released back to the pool since the last sampling

numconnsuccessfullymatched

CountStatistic

Number of connections successfully matched

numconntimedout

CountStatistic

Number of connections in the pool that timed out between the start time and the last sampling time

numconnused

RangeStatistic

Number of connections that are currently being used, as well as information about the maximum number of connections that were used (high water mark)

frequsedsqlqueries

StringStatistic

List of the most frequently used SQL queries (Available only when SQL Tracing is enabled)

numpotentialconnleak

CountStatistic

Number of potential connection leaks

numpotentialstatementleak

CountStatistic

Number of potential statement leaks (Available only when Statement Leak Dectection is enabled)

numstatementcachehit

CountStatistic

Number of statements that were found in the statement cache (Available only when the Statement Cache is enabled)

numstatementcachemiss

CountStatistic

Number of statements that were not found in the statement cache (Available only when the Statement Cache is enabled)

waitqueuelength

CountStatistic

Number of connection requests in the queue waiting to be serviced

Table 8-27 Application Specific Resource Monitoring Statistics (Connection Pool)

Statistic Data Type Description

numconnacquired

CountStatistic

Number of logical connections acquired from the pool since the last sampling

numconnreleased

CountStatistic

Number of connections released back to the pool since the last sampling

numconnused

RangeStatistic

Number of connections that are currently being used, as well as information about the maximum number of connections that were used (high water mark)

Security Statistics

Security fits into the tree of objects as shown in Security Tree Hierarchy.

Statistics available for security are shown in the following sections:

EJB Security Statistics

Use the following dotted name pattern for EJB security statistics:

server.security.ejb.statistic

The statistics available for EJB security are listed in the following table.

Table 8-28 EJB Security Monitoring Statistics

Statistic Data Type Description

policyconfigurationcount

CountStatistic

Number of policy configuration

securitymanagercount

CountStatistic

Number of EJB security managers

Web Security Statistics

Use the following dotted name pattern for web security statistics:

server.security.web.statistic

The statistics available for web security are listed in the following table.

Table 8-29 Web Security Monitoring Statistics

Statistic Data Type Description

websecuritymanagercount

CountStatistic

Number of security managers

webpolicyconfigurationcount

CountStatistic

Number of policy configuration objects

Realm Security Statistics

Use the following dotted name pattern for realm security statistics:

server.security.realm.statistic

The statistics available for realm security are listed in the following table.

Table 8-30 Realm Security Monitoring Statistics

Statistic Data Type Description

realmcount

CountStatistic

Number of realms

Thread Pool Statistics

The thread pool fits into the tree of objects as shown in Thread Pool Tree Hierarchy.

The statistics available for thread pools are shown in the following sections:

Thread Pool Monitoring Statistics

Use the following dotted name pattern for thread pool statistics:

server.thread-pool.thread-pool.statistic

The statistics available for the thread pool are shown in the following table.

Table 8-31 Thread Pool Monitoring Statistics

Statistic Data Type Description

averagetimeinqueue

BoundedRangeStatistic

Average amount of time (in milliseconds) a request waited in the queue before being processed

averageworkcompletiontime

BoundedRangeStatistic

Average amount of time (in milliseconds) taken to complete an assignment

currentbusythreads

CountStatistic

Number of busy threads

currentnumberofthreads

BoundedRangeStatistic

Current number of request processing threads

numberofavailablethreads

CountStatistic

Number of available threads

numberofworkitemsinqueue

BoundedRangeStatistic

Current number of work items waiting in queue

totalworkitemsadded

CountStatistic

Total number of work items added to the work queue as of last sampling

JVM Statistics for Java SE-Thread Information

The statistics available for ThreadInfo in the JVM in Java SE are shown in the following table.

Table 8-32 JVM Monitoring Statistics for Java SE - Thread Info

Statistic Data Type Description

blockedcount

CountStatistic

Total number of times that the thread entered the BLOCKED state.

blockedtime

CountStatistic

Time elapsed (in milliseconds) since the thread entered the BLOCKED state. Returns -1 if thread contention monitoring is disabled.

lockname

StringStatistic

String representation of the monitor lock that the thread is blocked to enter or waiting to be notified through the Object.wait method.

lockownerid

CountStatistic

ID of the thread that holds the monitor lock of an object on which this thread is blocking.

lockownername

StringStatistic

Name of the thread that holds the monitor lock of the object this thread is blocking on.

stacktrace

StringStatistic

Stack trace associated with this thread.

threadid

CountStatistic

ID of the thread.

threadname

StringStatistic

Name of the thread.

threadstate

StringStatistic

State of the thread.

waitedtime

CountStatistic

Elapsed time (in milliseconds) that the thread has been in a WAITING state. Returns -1 if thread contention monitoring is disabled.

waitedcount

CountStatistic

Total number of times the thread was in WAITING or TIMED_WAITING states.

Transaction Service Statistics

The transaction service allows the client to freeze the transaction subsystem in order to roll back transactions and determine which transactions are in process at the time of the freeze. The transaction service fits into the tree of objects as shown in Transactions Service Tree Hierarchy.

Use the following dotted name pattern for transaction service statistics:

server.transaction-service.statistic

The statistics available for the transaction service are shown in the following table.

Table 8-33 Transaction Service Monitoring Statistics

Statistic Data Type Description

activecount

CountStatistic

Number of transactions currently active.

activeids

StringStatistic

The ID’s of the transactions that are currently active. Every such transaction can be rolled back after freezing the transaction service.

committedcount

CountStatistic

Number of transactions that have been committed.

rolledbackcount

CountStatistic

Number of transactions that have been rolled back.

state

StringStatistic

Indicates whether or not the transaction has been frozen.

Web Statistics

The web module fits into the tree of objects as shown in Web Tree Hierarchy.

The available web statistics shown in the following sections:

Web Module Servlet Statistics

Use the following dotted name pattern for web module servlet statistics:

server.applications.web-module.virtual-server.servlet.statistic
server.applications.application.web-module.virtual-server.servlet.statistic

The available web module servlet statistics are shown in the following table.

Table 8-34 Web Module Servlet Statistics

Statistic Data Type Description

errorcount

CountStatistic

Cumulative number of cases where the response code is greater than or equal to 400.

maxtime

CountStatistic

Maximum amount of time the web container waits for requests.

processingtime

CountStatistic

Cumulative value of the amount of time required to process each request. The processing time is the average of request processing times divided by the request count.

requestcount

CountStatistic

The total number of requests processed so far.

servicetime

CountStatistic

Aggregate response time in milliseconds.

Web JSP Statistics

Use the following dotted name pattern for web JSP statistics:

server.applications.web-module.virtual-server.statistic
server.applications.application.web-module.virtual-server.statistic

The available web JSP statistics are shown in the following table.

Table 8-35 Web JSP Monitoring Statistics

Statistic Data Type Description

jspcount-current

RangeStatistic

Number of active JSP pages

jsperrorcount

CountStatistic

Total number of errors triggered by JSP page invocations

jspreloadedcount

CountStatistic

Total number of JSP pages that were reloaded

totaljspcount

CountStatistic

Total number of JSP pages ever loaded

Web Request Statistics

Use the following dotted name pattern for web request statistics:

server.applications.web-module.virtual-server.statistic
server.applications.application.web-module.virtual-server.statistic

The available web request statistics are shown in the following table.

Table 8-36 Web Request Monitoring Statistics

Statistic Data Type Description

errorcount

CountStatistic

Cumulative value of the error count, with error count representing the number of cases where the response code was greater than or equal to 400

maxtime

CountStatistic

Longest response time for a request; not a cumulative value, but the largest response time from among the response times

processingtime

CountStatistic

Average request processing time, in milliseconds

requestcount

CountStatistic

Cumulative number of the requests processed so far

Web Servlet Statistics

Use the following dotted name pattern for web servlet statistics:

server.applications.web-module.virtual-server.statistic
server.applications.application.web-module.virtual-server.statistic

The available web servlet statistics are shown in the following table.

Table 8-37 Web Servlet Monitoring Statistics

Statistic Data Type Description

activeservletsloadedcount

RangeStatistic

Number of currently loaded servlets

servletprocessingtimes

CountStatistic

Cumulative servlet processing times , in milliseconds

totalservletsloadedcount

CountStatistic

Cumulative number of servlets that have been loaded into the web module

Web Session Statistics

Use the following dotted name pattern for web session statistics:

server.applications.web-module.virtual-server.statistic
server.applications.application.web-module.virtual-server.statistic

The available web session statistics are shown in the following table.

Table 8-38 Web Session Monitoring Statistics

Statistic Data Type Description

activatedsessionstotal

CountStatistic

Total number of activated sessions

activesessionscurrent

RangeStatistic

Number of currently active sessions

activesessionshigh

CountStatistic

Maximum number of concurrently active sessions

expiredsessionstotal

CountStatistic

Total number of expired sessions

passivatedsessionstotal

CountStatistic

Total number of passivated sessions

persistedsessionstotal

CountStatistic

Total number of persisted sessions

rejectedsessionstotal

CountStatistic

Total number of rejected sessions

sessionstotal

CountStatistic

Total number of sessions created

Configuring JConsole to View GlassFish Server Monitoring Data

Java SE provides tools to connect to an MBean Server and view the MBeans registered with the server. JConsole is one such popular JMX Connector Client and is available as part of the standard Java SE distribution. When you configure JConsole for use with GlassFish Server, GlassFish Server becomes the JMX Connector’s server end and JConsole becomes the JMX connector’s client end.

To Connect JConsole to GlassFish Server

Java SE 6 enhances management and monitoring of the virtual machine by including a Platform MBean Server and by including managed beans (MBeans) to configure the virtual machine.

To view all MBeans, GlassFish Server provides a configuration of the standard JMX connector server called System JMX Connector Server. As part of GlassFish Server startup, an instance of this JMX Connector Server is started. Any compliant JMX connector client can connect to the server using the JMX Connector Server.

By default, GlassFish Server is configured with a non-secure System JMX Connector Server. If this is an issue, the JMX connector can be removed. However, access can be restricted to a specific IP address (for example, the loopback address) by setting address to locahost.

  1. Start the domain.
    For instructions, see To Start a Domain.

  2. Start JConsole using this format: JDK_HOME`/bin/jconsole`
    For example:

/usr/java/bin/jconsole

The JConsole Connect to Agent window is displayed. 3. Click the Remote tab and type the host name and port.
Always connect remotely with JConsole, otherwise MBeans will not load automatically. 4. Click Connect. 5. In the Remote Process text box, specify the JMX Service URL.
For example:

service:jmx:rmi:///jndi/rmi://localhost:8686/jmxrmi

The JMX Service URL is emitted by the server at startup, looking something like this:

[#|2009-12-03T10:25:17.737-0800|INFO|glassfishv3.0|
x..system.tools.admin.org.glassfish.server|_ThreadID=20;
_ThreadName=Thread-26;|JMXStartupService: Started JMXConnector, JMXService
URL = service:jmx:rmi://localhost:8686/jndi/rmi://localhost:8686/jmxrmi|#]

However, in most cases, simply entering host:port is fine, such as, 192.168.1.150:8686. The long Service URL is not needed.

Note

Another host name can be substituted for localhost. The default port number (8686) could change if the jmx-connector configuration has been modified.

  1. Click Connect.
    In the JConsole window you will see all your MBeans, JVM information, and so on, in various tabs. Most of the useful MBeans are to be found in the amx and java.lang domains.

See Also

For more information about JConsole, see http://docs.oracle.com/javase/8/docs/technotes/guides/management/jconsole.html.

Previous Next Contents
Eclipse Foundation Logo  Copyright © 2019, Oracle and/or its affiliates. All rights reserved.