Administering GlassFish Server Instances

Previous Next Contents

5 Administering GlassFish Server Instances

A GlassFish Server instance is a single Virtual Machine for the Java platform (Java Virtual Machine or JVM machine) on a single node in which GlassFish Server is running. A node defines the host where the GlassFish Server instance resides. The JVM machine must be compatible with the Java Platform, Enterprise Edition (Java EE).

GlassFish Server instances form the basis of an application deployment. An instance is a building block in the clustering, load balancing, and session persistence features of GlassFish Server. Each instance belongs to a single domain and has its own directory structure, configuration, and deployed applications. Every instance contains a reference to a node that defines the host where the instance resides.

The following topics are addressed here:

Types of GlassFish Server Instances

Each GlassFish Server instance is one of the following types of instance:

Standalone instance

A standalone instance does not share its configuration with any other instances or clusters. A standalone instance is created if either of the following conditions is met:

  • No configuration or cluster is specified in the command to create the instance.

  • A configuration that is not referenced by any other instances or clusters is specified in the command to create the instance.
    When no configuration or cluster is specified, a copy of the default-config configuration is created for the instance. The name of this configuration is instance-name`-config`, where instance-name represents the name of an unclustered server instance.

Shared instance

A shared instance shares its configuration with other instances or clusters. A shared instance is created if a configuration that is referenced by other instances or clusters is specified in the command to create the instance.

Clustered instance

A clustered instance inherits its configuration from the cluster to which the instance belongs and shares its configuration with other instances in the cluster. A clustered instance is created if a cluster is specified in the command to create the instance.
Any instance that is not part of a cluster is considered an unclustered server instance. Therefore, standalone instances and shared instances are unclustered server instances.

Administering GlassFish Server Instances Centrally

Centralized administration requires the Distributed Component Object Model (DCOM) remote protocol or secure shell (SSH) to be set up. If DCOM or SSH is set up, you can administer clustered instances without the need to log in to hosts where remote instances reside. For information about setting up DCOM and SSH, see Enabling Centralized Administration of GlassFish Server Instances.

Administering GlassFish Server instances centrally involves the following tasks:

To Create an Instance Centrally

Use the create-instance subcommand in remote mode to create a GlassFish Server instance centrally. Creating an instance adds the instance to the DAS configuration and creates the instance’s files on the host where the instance resides.

If the instance is a clustered instance that is managed by GMS, system properties for the instance that relate to GMS must be configured correctly. To avoid the need to restart the DAS and the instance, configure an instance’s system properties that relate to GMS when you create the instance. If you change GMS-related system properties for an existing instance, the DAS and the instance must be restarted to apply the changes. For information about GMS, see Group Management Service.

Before You Begin

Ensure that following prerequisites are met:

  • The node where the instance is to reside exists.

  • The node where the instance is to reside is either enabled for remote communication or represents the host on which the DAS is running. For information about how to create a node that is enabled for remote communication, see the following sections:

  • The user of the DAS can use DCOM or SSH to log in to the host for the node where the instance is to reside.

If any of these prerequisites is not met, create the instance locally as explained in To Create an Instance Locally.

If you are adding the instance to a cluster, ensure that the cluster to which you are adding the instance exists. For information about how to create a cluster, see To Create a Cluster.

If the instance is to reference an existing named configuration, ensure that the configuration exists. For more information, see To Create a Named Configuration.

The instance might be a clustered instance that is managed by GMS and resides on a node that represents a multihome host. In this situation, ensure that you have the Internet Protocol (IP) address of the network interface to which GMS binds.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Run the create-instance subcommand.

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for configuring the instance, see the create-instance(1) help page.

  • If you are creating a standalone instance, do not specify a cluster.
    If the instance is to reference an existing configuration, specify a configuration that no other cluster or instance references.

asadmin> create-instance --node node-name
[--config configuration-name]instance-name
node-name

The node on which the instance is to reside.

configuration-name

The name of the existing named configuration that the instance will reference.
If you do not require the instance to reference an existing configuration, omit this option. A copy of the default-config configuration is created for the instance. The name of this configuration is instance-name`-config`, where instance-name is the name of the server instance.

instance-name

Your choice of name for the instance that you are creating.

  • If you are creating a shared instance, specify the configuration that the instance will share with other clusters or instances.
    Do not specify a cluster.

asadmin> create-instance --node node-name
--config configuration-name instance-name
node-name

The node on which the instance is to reside.

configuration-name

The name of the existing named configuration that the instance will reference.

instance-name

Your choice of name for the instance that you are creating.

  • If you are creating a clustered instance, specify the cluster to which the instance will belong.
    If the instance is managed by GMS and resides on a node that represents a multihome host, specify the `GMS-BIND-INTERFACE-ADDRESS-`cluster-name system property.

asadmin> create-instance --cluster cluster-name --node node-name
[--systemproperties GMS-BIND-INTERFACE-ADDRESS-cluster-name=bind-address]instance-name
cluster-name

The name of the cluster to which you are adding the instance.

node-name

The node on which the instance is to reside.

bind-address

The IP address of the network interface to which GMS binds. Specify this option only if the instance is managed by GMS and resides on a node that represents a multihome host.

instance-name

Your choice of name for the instance that you are creating.

Example 5-1 Creating a Clustered Instance Centrally

This example adds the instance pmd-i1 to the cluster pmdclust in the domain domain1. The instance resides on the node sj01, which represents the host sj01.example.com.

asadmin> create-instance --cluster pmdclust --node sj01 pmd-i1
Port Assignments for server instance pmd-i1:
JMX_SYSTEM_CONNECTOR_PORT=28686
JMS_PROVIDER_PORT=27676
HTTP_LISTENER_PORT=28080
ASADMIN_LISTENER_PORT=24848
IIOP_SSL_LISTENER_PORT=23820
IIOP_LISTENER_PORT=23700
HTTP_SSL_LISTENER_PORT=28181
IIOP_SSL_MUTUALAUTH_PORT=23920
The instance, pmd-i1, was created on host sj01.example.com
Command create-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help create-instance at the command line.

Next Steps

After creating an instance, you can start the instance as explained in the following sections:

To List All Instances in a Domain

Use the list-instances subcommand in remote mode to obtain information about existing instances in a domain.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Run the list-instances subcommand.

asadmin> list-instances

Example 5-2 Listing Basic Information About All GlassFish Server Instances in a Domain

This example lists the name and status of all GlassFish Server instances in the current domain.

asadmin> list-instances
pmd-i2 running
yml-i2 running
pmd-i1 running
yml-i1 running
pmdsa1 not running
Command list-instances executed successfully.

Example 5-3 Listing Detailed Information About All GlassFish Server Instances in a Domain

This example lists detailed information about all GlassFish Server instances in the current domain.

asadmin> list-instances --long=true
NAME    HOST              PORT   PID    CLUSTER     STATE
pmd-i1  sj01.example.com  24848  31310  pmdcluster   running
yml-i1  sj01.example.com  24849  25355  ymlcluster   running
pmdsa1  localhost         24848  -1     ---          not running
pmd-i2  sj02.example.com  24848  22498  pmdcluster   running
yml-i2  sj02.example.com  24849  20476  ymlcluster   running
ymlsa1  localhost         24849  -1     ---          not running
Command list-instances executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help list-instances at the command line.

To Delete an Instance Centrally

Use the delete-instance subcommand in remote mode to delete a GlassFish Server instance centrally.

Caution:

If you are using a Java Message Service (JMS) cluster with a master broker, do not delete the instance that is associated with the master broker. If this instance must be deleted, use the change-master-broker subcommand to assign the master broker to a different instance.

Deleting an instance involves the following:

  • Removing the instance from the configuration of the DAS

  • Deleting the instance’s files from file system

Before You Begin

Ensure that the instance that you are deleting is not running. For information about how to stop an instance, see the following sections:

asadmin> list-instances instance-name
instance-name

The name of the instance that you are deleting.

  1. Run the delete-instance subcommand.

asadmin> delete-instance instance-name
instance-name

The name of the instance that you are deleting.

Example 5-4 Deleting an Instance Centrally

This example confirms that the instance pmd-i1 is not running and deletes the instance.

asadmin> list-instances pmd-i1
pmd-i1   not running
Command list-instances executed successfully.
asadmin> delete-instance pmd-i1
Command _delete-instance-filesystem executed successfully.
The instance, pmd-i1, was deleted from host sj01.example.com
Command delete-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommands by typing the following commands at the command line:

  • asadmin help delete-instance

  • asadmin help list-instances

To Start a Cluster

Use the start-cluster subcommand in remote mode to start a cluster.

Starting a cluster starts all instances in the cluster that are not already running.

Before You Begin

Ensure that following prerequisites are met:

  • Each node where an instance in the cluster resides is either enabled for remote communication or represents the host on which the DAS is running.

  • The user of the DAS can use DCOM or SSH to log in to the host for any node where instances in the cluster reside.

If any of these prerequisites is not met, start the cluster by starting each instance locally as explained in To Start an Individual Instance Locally.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Run the start-cluster subcommand.

asadmin> start-cluster cluster-name
cluster-name

The name of the cluster that you are starting.

Example 5-5 Starting a Cluster

This example starts the cluster pmdcluster.

asadmin> start-cluster pmdcluster
Command start-cluster executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help start-cluster at the command line.

Next Steps

After starting a cluster, you can deploy applications to the cluster. For more information, see GlassFish Server Open Source Edition Application Deployment Guide.

To Stop a Cluster

Use the stop-cluster subcommand in remote mode to stop a cluster.

Stopping a cluster stops all running instances in the cluster.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Run the stop-cluster subcommand.

asadmin> stop-cluster cluster-name
cluster-name

The name of the cluster that you are stopping.

Example 5-6 Stopping a Cluster

This example stops the cluster pmdcluster.

asadmin> stop-cluster pmdcluster
Command stop-cluster executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help stop-cluster at the command line.

Troubleshooting

If instances in the cluster have become unresponsive and fail to stop, run the subcommand again with the --kill option set to true. When this option is true, the subcommand uses functionality of the operating system to kill the process for each running instance in the cluster.

To Start an Individual Instance Centrally

Use the start-instance subcommand in remote mode to start an individual instance centrally.

Before You Begin

Ensure that following prerequisites are met:

  • The node where the instance resides is either enabled for remote communication or represents the host on which the DAS is running.

  • The user of the DAS can use DCOM or SSH to log in to the host for the node where the instance resides.

If any of these prerequisites is not met, start the instance locally as explained in To Start an Individual Instance Locally.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Run the start-instance subcommand.

asadmin> start-instance instance-name

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for controlling the behavior of the instance, see the start-instance(1) help page.

instance-name

The name of the instance that you are starting.

Example 5-7 Starting an Individual Instance Centrally

This example starts the instance pmd-i2, which resides on the node sj02. This node represents the host sj02.example.com. The configuration of the instance on this node already matched the configuration of the instance in the DAS when the instance was started.

asadmin> start-instance pmd-i2
CLI801 Instance is already synchronized
Waiting for pmd-i2 to start ............
Successfully started the instance: pmd-i2
instance Location: /export/glassfish3/glassfish/nodes/sj02/pmd-i2
Log File: /export/glassfish3/glassfish/nodes/sj02/pmd-i2/logs/server.log
Admin Port: 24851
Command start-local-instance executed successfully.
The instance, pmd-i2, was started on host sj02.example.com
Command start-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help start-instance at the command line.

Next Steps

After starting an instance, you can deploy applications to the instance. For more information, see the GlassFish Server Open Source Edition Application Deployment Guide.

To Stop an Individual Instance Centrally

Use the stop-instance subcommand in remote mode to stop an individual instance centrally.

When an instance is stopped, the instance stops accepting new requests and waits for all outstanding requests to be completed.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Run the stop-instance subcommand.

Example 5-8 Stopping an Individual Instance Centrally

This example stops the instance pmd-i2.

asadmin> stop-instance pmd-i2
The instance, pmd-i2, is stopped.
Command stop-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help stop-instance at the command line.

Troubleshooting

If the instance has become unresponsive and fails to stop, run the subcommand again with the --kill option set to true. When this option is true, the subcommand uses functionality of the operating system to kill the instance process.

To Restart an Individual Instance Centrally

Use the restart-instance subcommand in remote mode to start an individual instance centrally.

When this subcommand restarts an instance, the DAS synchronizes the instance with changes since the last synchronization as described in Default Synchronization for Files and Directories.

If you require different synchronization behavior, stop and start the instance as explained in To Resynchronize an Instance and the DAS Online.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Run the restart-instance subcommand.

asadmin> restart-instance instance-name
instance-name

The name of the instance that you are restarting.

Example 5-9 Restarting an Individual Instance Centrally

This example restarts the instance pmd-i2.

asadmin> restart-instance pmd-i2
pmd-i2 was restarted.
Command restart-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help restart-instance at the command line.

Troubleshooting

If the instance has become unresponsive and fails to stop, run the subcommand again with the --kill option set to true. When this option is true, the subcommand uses functionality of the operating system to kill the instance process before restarting the instance.

Administering GlassFish Server Instances Locally

Local administration does not require DCOM or SSH to be set up. If neither DCOM nor SSH is set up, you must log in to each host where remote instances reside and administer the instances individually.

Administering GlassFish Server instances locally involves the following tasks:

Note:

Even if neither DCOM nor SSH is set up, you can obtain information about instances in a domain without logging in to each host where remote instances reside. For instructions, see To List All Instances in a Domain.

To Create an Instance Locally

Use the create-local-instance subcommand in remote mode to create a GlassFish Server instance locally. Creating an instance adds the instance to the DAS configuration and creates the instance’s files on the host where the instance resides.

If the instance is a clustered instance that is managed by GMS, system properties for the instance that relate to GMS must be configured correctly. To avoid the need to restart the DAS and the instance, configure an instance’s system properties that relate to GMS when you create the instance. If you change GMS-related system properties for an existing instance, the DAS and the instance must be restarted to apply the changes. For information about GMS, see Group Management Service.

Before You Begin

If you plan to specify the node on which the instance is to reside, ensure that the node exists.

Note:

If you create the instance on a host for which no nodes are defined, you can create the instance without creating a node beforehand. In this situation, GlassFish Server creates a CONFIG node for you. The name of the node is the unqualified name of the host.

For information about how to create a node, see the following sections:

If you are adding the instance to a cluster, ensure that the cluster to which you are adding the instance exists. For information about how to create a cluster, see To Create a Cluster.

If the instance is to reference an existing named configuration, ensure that the configuration exists. For more information, see To Create a Named Configuration.

The instance might be a clustered instance that is managed by GMS and resides on a node that represents a multihome host. In this situation, ensure that you have the Internet Protocol (IP) address of the network interface to which GMS binds.

  1. Ensure that the DAS is running.
    Remote subcommands require a running server.

  2. Log in to the host that is represented by the node where the instance is to reside.

  3. Run the create-local-instance subcommand.

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for configuring the instance, see the create-local-instance(1) help page.

  • If you are creating a standalone instance, do not specify a cluster.
    If the instance is to reference an existing configuration, specify a configuration that no other cluster or instance references.

$ asadmin --host das-host [--port admin-port]
create-local-instance [--node node-name] [--config configuration-name]instance-name
das-host

The name of the host where the DAS is running.

admin-port

The HTTP or HTTPS port on which the DAS listens for administration requests. If the DAS listens on the default port for administration requests, you may omit this option.

node-name

The node on which the instance is to reside.
If you are creating the instance on a host for which fewer than two nodes are defined, you may omit this option.
If no nodes are defined for the host, GlassFish Server creates a CONFIG node for you. The name of the node is the unqualified name of the host.
If one node is defined for the host, the instance is created on that node.

configuration-name

The name of the existing named configuration that the instance will reference.
If you do not require the instance to reference an existing configuration, omit this option. A copy of the default-config configuration is created for the instance. The name of this configuration is instance-name`-config`, where instance-name is the name of the server instance.

instance-name

Your choice of name for the instance that you are creating.

  • If you are creating a shared instance, specify the configuration that the instance will share with other clusters or instances.
    Do not specify a cluster.

$ asadmin --host das-host [--port admin-port]
create-local-instance [--node node-name] --config configuration-name instance-name
das-host

The name of the host where the DAS is running.

admin-port

The HTTP or HTTPS port on which the DAS listens for administration requests. If the DAS listens on the default port for administration requests, you may omit this option.

node-name

The node on which the instance is to reside.
If you are creating the instance on a host for which fewer than two nodes are defined, you may omit this option.
If no nodes are defined for the host, GlassFish Server creates a CONFIG node for you. The name of the node is the unqualified name of the host.
If one node is defined for the host, the instance is created on that node.

configuration-name

The name of the existing named configuration that the instance will reference.

instance-name

Your choice of name for the instance that you are creating.

  • If you are creating a clustered instance, specify the cluster to which the instance will belong.
    If the instance is managed by GMS and resides on a node that represents a multihome host, specify the `GMS-BIND-INTERFACE-ADDRESS-`cluster-name system property.

$ asadmin --host das-host [--port admin-port]
create-local-instance --cluster cluster-name [--node node-name]
[--systemproperties GMS-BIND-INTERFACE-ADDRESS-cluster-name=bind-address]instance-name
das-host

The name of the host where the DAS is running.

admin-port

The HTTP or HTTPS port on which the DAS listens for administration requests. If the DAS listens on the default port for administration requests, you may omit this option.

cluster-name

The name of the cluster to which you are adding the instance.

node-name

The node on which the instance is to reside.
If you are creating the instance on a host for which fewer than two nodes are defined, you may omit this option.
If no nodes are defined for the host, GlassFish Server creates a CONFIG node for you. The name of the node is the unqualified name of the host.
If one node is defined for the host, the instance is created on that node.

bind-address

The IP address of the network interface to which GMS binds. Specify this option only if the instance is managed by GMS and resides on a node that represents a multihome host.

instance-name

Your choice of name for the instance that you are creating.

Example 5-10 Creating a Clustered Instance Locally Without Specifying a Node

This example adds the instance kui-i1 to the cluster kuicluster locally. The CONFIG node xk01 is created automatically to represent the host xk01.example.com, on which this example is run. The DAS is running on the host dashost.example.com and listens for administration requests on the default port.

The commands to list the nodes in the domain are included in this example only to demonstrate the creation of the node xk01. These commands are not required to create the instance.

$ asadmin --host dashost.example.com list-nodes --long
NODE NAME          TYPE    NODE HOST         INSTALL DIRECTORY   REFERENCED BY
localhost-domain1  CONFIG  localhost         /export/glassfish3
Command list-nodes executed successfully.
$ asadmin --host dashost.example.com
create-local-instance --cluster kuicluster kui-i1
Rendezvoused with DAS on dashost.example.com:4848.
Port Assignments for server instance kui-i1:
JMX_SYSTEM_CONNECTOR_PORT=28687
JMS_PROVIDER_PORT=27677
HTTP_LISTENER_PORT=28081
ASADMIN_LISTENER_PORT=24849
JAVA_DEBUGGER_PORT=29009
IIOP_SSL_LISTENER_PORT=23820
IIOP_LISTENER_PORT=23700
OSGI_SHELL_TELNET_PORT=26666
HTTP_SSL_LISTENER_PORT=28182
IIOP_SSL_MUTUALAUTH_PORT=23920
Command create-local-instance executed successfully.
$ asadmin --host dashost.example.com list-nodes --long
NODE NAME          TYPE    NODE HOST         INSTALL DIRECTORY   REFERENCED BY
localhost-domain1  CONFIG  localhost         /export/glassfish3
xk01               CONFIG  xk01.example.com  /export/glassfish3  kui-i1
Command list-nodes executed successfully.

Example 5-11 Creating a Clustered Instance Locally

This example adds the instance yml-i1 to the cluster ymlcluster locally. The instance resides on the node sj01. The DAS is running on the host das1.example.com and listens for administration requests on the default port.

$ asadmin --host das1.example.com
create-local-instance --cluster ymlcluster --node sj01 yml-i1
Rendezvoused with DAS on das1.example.com:4848.
Port Assignments for server instance yml-i1:
JMX_SYSTEM_CONNECTOR_PORT=28687
JMS_PROVIDER_PORT=27677
HTTP_LISTENER_PORT=28081
ASADMIN_LISTENER_PORT=24849
JAVA_DEBUGGER_PORT=29009
IIOP_SSL_LISTENER_PORT=23820
IIOP_LISTENER_PORT=23700
OSGI_SHELL_TELNET_PORT=26666
HTTP_SSL_LISTENER_PORT=28182
IIOP_SSL_MUTUALAUTH_PORT=23920
Command create-local-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help create-local-instance at the command line.

Next Steps

After creating an instance, you can start the instance as explained in the following sections:

To Delete an Instance Locally

Use the delete-local-instance subcommand in remote mode to delete a GlassFish Server instance locally.

Caution:

If you are using a Java Message Service (JMS) cluster with a master broker, do not delete the instance that is associated with the master broker. If this instance must be deleted, use the change-master-broker subcommand to assign the master broker to a different instance.

Deleting an instance involves the following:

  • Removing the instance from the configuration of the DAS

  • Deleting the instance’s files from file system

Before You Begin

Ensure that the instance that you are deleting is not running. For information about how to stop an instance, see the following sections:

$ asadmin --host das-host [--port admin-port]
list-instances instance-name
das-host

The name of the host where the DAS is running.

admin-port

The HTTP or HTTPS port on which the DAS listens for administration requests. If the DAS listens on the default port for administration requests, you may omit this option.

instance-name

The name of the instance that you are deleting.

  1. Run the delete-local-instance subcommand.

$ asadmin --host das-host [--port admin-port]
delete-local-instance [--node node-name]instance-name
das-host

The name of the host where the DAS is running.

admin-port

The HTTP or HTTPS port on which the DAS listens for administration requests. If the DAS listens on the default port for administration requests, you may omit this option.

node-name

The node on which the instance resides. If only one node is defined for the GlassFish Server installation that you are running on the node’s host, you may omit this option.

instance-name

The name of the instance that you are deleting.

Example 5-12 Deleting an Instance Locally

This example confirms that the instance yml-i1 is not running and deletes the instance.

$ asadmin --host das1.example.com list-instances yml-i1
yml-i1   not running
Command list-instances executed successfully.
$ asadmin --host das1.example.com delete-local-instance --node sj01 yml-i1
Command delete-local-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommands by typing the following commands at the command line:

  • asadmin help delete-local-instance

  • asadmin help list-instances

To Start an Individual Instance Locally

Use the start-local-instance subcommand in local mode to start an individual instance locally.

  1. Log in to the host that is represented by the node where the instance resides.

  2. Run the start-local-instance subcommand.

$ asadmin start-local-instance [--node node-name]instance-name

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for controlling the behavior of the instance, see the start-local-instance(1) help page.

node-name

The node on which the instance resides. If only one node is defined for the GlassFish Server installation that you are running on the node’s host, you may omit this option.

instance-name

The name of the instance that you are starting.

Example 5-13 Starting an Individual Instance Locally

This example starts the instance yml-i1 locally. The instance resides on the node sj01.

$ asadmin start-local-instance --node sj01 yml-i1
Waiting for yml-i1 to start ...............
Successfully started the instance: yml-i1
instance Location: /export/glassfish3/glassfish/nodes/sj01/yml-i1
Log File: /export/glassfish3/glassfish/nodes/sj01/yml-i1/logs/server.log
Admin Port: 24849
Command start-local-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help start-local-instance at the command line.

Next Steps

After starting an instance, you can deploy applications to the instance. For more information, see the GlassFish Server Open Source Edition Application Deployment Guide.

To Stop an Individual Instance Locally

Use the stop-local-instance subcommand in local mode to stop an individual instance locally.

When an instance is stopped, the instance stops accepting new requests and waits for all outstanding requests to be completed.

  1. Log in to the host that is represented by the node where the instance resides.

  2. Run the stop-local-instance subcommand.

$ asadmin stop-local-instance [--node node-name]instance-name
node-name

The node on which the instance resides. If only one node is defined for the GlassFish Server installation that you are running on the node’s host, you may omit this option.

instance-name

The name of the instance that you are stopping.

Example 5-14 Stopping an Individual Instance Locally

This example stops the instance yml-i1 locally. The instance resides on the node sj01.

$ asadmin stop-local-instance --node sj01 yml-i1
Waiting for the instance to stop ....
Command stop-local-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help stop-local-instance at the command line.

Troubleshooting

If the instance has become unresponsive and fails to stop, run the subcommand again with the --kill option set to true. When this option is true, the subcommand uses functionality of the operating system to kill the instance process.

To Restart an Individual Instance Locally

Use the restart-local-instance subcommand in local mode to restart an individual instance locally.

When this subcommand restarts an instance, the DAS synchronizes the instance with changes since the last synchronization as described in Default Synchronization for Files and Directories.

If you require different synchronization behavior, stop and start the instance as explained in To Resynchronize an Instance and the DAS Online.

  1. Log in to the host that is represented by the node where the instance resides.

  2. Run the restart-local-instance subcommand.

$ asadmin restart-local-instance [--node node-name]instance-name
node-name

The node on which the instance resides. If only one node is defined for the GlassFish Server installation that you are running on the node’s host, you may omit this option.

instance-name

The name of the instance that you are restarting.

Example 5-15 Restarting an Individual Instance Locally

This example restarts the instance yml-i1 locally. The instance resides on the node sj01.

$ asadmin restart-local-instance --node sj01 yml-i1
Command restart-local-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommand by typing asadmin help restart-local-instance at the command line.

Troubleshooting

If the instance has become unresponsive and fails to stop, run the subcommand again with the --kill option set to true. When this option is true, the subcommand uses functionality of the operating system to kill the instance process before restarting the instance.

Resynchronizing GlassFish Server Instances and the DAS

Configuration data for a GlassFish Server instance is stored as follows:

  • In the repository of the domain administration server (DAS)

  • In a cache on the host that is local to the instance

The configuration data in these locations must be synchronized. The cache is synchronized in the following circumstances:

  • Whenever an asadmin subcommand is run. For more information, see "Impact of Configuration Changes" in GlassFish Server Open Source Edition Administration Guide.

  • When a user uses the administration tools to start or restart an instance.

Default Synchronization for Files and Directories

The --sync option of the subcommands for starting an instance controls the type of synchronization between the DAS and the instance’s files when the instance is started. You can use this option to override the default synchronization behavior for the files and directories of an instance. For more information, see To Resynchronize an Instance and the DAS Online.

On the DAS, the files and directories of an instance are stored in the domain-dir directory, where domain-dir is the directory in which a domain’s configuration is stored. The default synchronization behavior for the files and directories of an instance is as follows:

applications

This directory contains a subdirectory for each application that is deployed to the instance.
By default, only a change to an application’s top-level directory within the application directory causes the DAS to synchronize that application’s directory. When the DAS resynchronizes the applications directory, all the application’s files and all generated content that is related to the application are copied to the instance.
If a file below a top-level subdirectory is changed without a change to a file in the top-level subdirectory, full synchronization is required. In normal operation, files below the top-level subdirectories of these directories are not changed and such files should not be changed by users. If an application is deployed and undeployed, full synchronization is not necessary to update the instance with the change.

config

This directory contains configuration files for the entire domain.
By default, the DAS resynchronizes files that have been modified since the last resynchronization only if the domain.xml file in this directory has been modified.

Note:

If you add a file to the config directory of an instance, the file is deleted when the instance is resynchronized with the DAS. However, any file that you add to the config directory of the DAS is not deleted when instances and the DAS are resynchronized. By default, any file that you add to the config directory of the DAS is not resynchronized. If you require any additional configuration files to be resynchronized, you must specify the files explicitly. For more information, see To Resynchronize Additional Configuration Files.

config
`config/`config-name

This directory contains files that are to be shared by all instances that reference the named configuration config-name. A config-name directory exists for each named configuration in the configuration of the DAS.
Because the config-name directory contains the subdirectories lib and docroot, this directory might be very large. Therefore, by default, only a change to a file or a top-level subdirectory of config-name causes the DAS to resynchronize the config-name directory.

config/domain.xml

This file contains the DAS configuration for the domain to which the instance belongs.
By default, the DAS resynchronizes this file if it has been modified since the last resynchronization.

Note:

A change to the config/domain.xml file is required to cause the DAS to resynchronize an instance’s files. If the config/domain.xml file has not changed since the last resynchronization, none of the instance’s files is resynchronized, even if some of these files are out of date in the cache.

docroot

This directory is the HTTP document root directory. By default, all instances in a domain use the same document root directory. To enable instances to use a different document root directory, a virtual server must be created in which the docroot property is set. For more information, see the create-virtual-server(1) help page.
The docroot directory might be very large. Therefore, by default, only a change to a file or a subdirectory in the top level of the docroot directory causes the DAS to resynchronize the docroot directory. The DAS checks files in the top level of the docroot directory to ensure that changes to the index.html file are detected.
When the DAS resynchronizes the docroot directory, all modified files and subdirectories at any level are copied to the instance.
If a file below a top-level subdirectory is changed without a change to a file in the top-level subdirectory, full synchronization is required.

generated

This directory contains generated files for Java EE applications and modules, for example, EJB stubs, compiled JSP classes, and security policy files. Do not modify the contents of this directory.
This directory is resynchronized when the applications directory is resynchronized. Therefore, only directories for applications that are deployed to the instance are resynchronized.

java-web-start

This directory is not resynchronized. It is created and populated as required on each instance.

lib
lib/classes

These directories contain common Java class files or JAR archives and ZIP archives for use by applications that are deployed to the entire domain. Typically, these directories contain common JDBC drivers and other utility libraries that are shared by all applications in the domain.
The contents of these directories are loaded by the common class loader. For more information, see "Using the Common Class Loader" in GlassFish Server Open Source Edition Application Development Guide. The class loader loads the contents of these directories in the following order:

  1. lib/classes

  2. lib/*.jar

  3. lib/*.zip
    The lib directory also contains the following subdirectories:

    applibs

    This directory contains application-specific Java class files or JAR archives and ZIP archives for use by applications that are deployed to the entire domain.

    ext

    This directory contains optional packages in JAR archives and ZIP archives for use by applications that are deployed to the entire domain. These archive files are loaded by using Java extension mechanism. For more information, see Optional Packages - An Overview (http://docs.oracle.com/javase/7/docs/technotes/guides/extensions/extensions.html).

Note:

Optional packages were formerly known as standard extensions or extensions.

The `lib` directory and its subdirectories typically contain only a
small number of files. Therefore, by default, a change to any file in
these directories causes the DAS to resynchronize the file that
changed.

To Resynchronize an Instance and the DAS Online

Resynchronizing an instance and the DAS updates the instance with changes to the instance’s configuration files on the DAS. An instance is resynchronized with the DAS when the instance is started or restarted.

Note:

Resynchronization of an instance is only required if the instance is stopped. A running instance does not require resynchronization.

  1. Ensure that the DAS is running.

  2. Determine whether the instance is stopped.

asadmin> list-instances instance-name
instance-name

The name of the instance that you are resynchronizing with the DAS.
If the instance is stopped, the list-instances subcommand indicates that the instance is not running.

  1. If the instance is stopped, start the instance.
    If the instance is running, no further action is required.

    • If DCOM or SSH is set up, start the instance centrally.
      If you require full synchronization, set the --sync option of the start-instance subcommand to full. If default synchronization is sufficient, omit this option.

asadmin> start-instance [--sync full] instance-name

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for controlling the behavior of the instance, see the start-instance(1) help page.

instance-name

The name of the instance that you are starting.

  • If neither DCOM nor SSH is set up, start the instance locally from the host where the instance resides.
    If you require full synchronization, set the --sync option of the start-local-instance subcommand to full. If default synchronization is sufficient, omit this option.

$ asadmin start-local-instance [--node node-name] [--sync full] instance-name

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for controlling the behavior of the instance, see the start-local-instance(1) help page.

node-name

The node on which the instance resides. If only one node is defined for the GlassFish Server installation that you are running on the node’s host, you may omit this option.

instance-name

The name of the instance that you are starting.

Example 5-16 Resynchronizing an Instance and the DAS Online

This example determines that the instance yml-i1 is stopped and fully resynchronizes the instance with the DAS. Because neither DCOM nor SSH is set up, the instance is started locally on the host where the instance resides. In this example, multiple nodes are defined for the GlassFish Server installation that is running on the node’s host.

To determine whether the instance is stopped, the following command is run in multimode on the DAS host:

asadmin> list-instances yml-i1
yml-i1   not running
Command list-instances executed successfully.

To start the instance, the following command is run in single mode on the host where the instance resides:

$ asadmin start-local-instance --node sj01 --sync full yml-i1
Removing all cached state for instance yml-i1.
Waiting for yml-i1 to start ...............
Successfully started the instance: yml-i1
instance Location: /export/glassfish3/glassfish/nodes/sj01/yml-i1
Log File: /export/glassfish3/glassfish/nodes/sj01/yml-i1/logs/server.log
Admin Port: 24849
Command start-local-instance executed successfully.

See Also

You can also view the full syntax and options of the subcommands by typing the following commands at the command line.

asadmin help list-instances

asadmin help start-instance

asadmin help start-local-instance

To Resynchronize Library Files

To ensure that library files are resynchronized correctly, you must ensure that each library file is placed in the correct directory for the type of file.

  1. Place each library file in the correct location for the type of library file as shown in the following table.

Type of Library Files

Location

Common JAR archives and ZIP archives for all applications in a domain.

domain-dir`/lib`

Common Java class files for a domain for all applications in a domain.

domain-dir`/lib/classes`

Application-specific libraries.

domain-dir`/lib/applibs`

Optional packages for all applications in a domain.

domain-dir`/lib/ext`

Library files for all applications that are deployed to a specific cluster or standalone instance.

domain-dir`/config/config-name/lib`

Optional packages for all applications that are deployed to a specific cluster or standalone instance.

domain-dir`/config/config-name/lib/ext`

domain-dir

The directory in which the domain’s configuration is stored.

config-name

For a standalone instance: the named configuration that the instance references.
For a clustered instance: the named configuration that the cluster to which the instance belongs references.

  1. When you deploy an application that depends on these library files, use the --libraries option of the deploy subcommand to specify these dependencies.
    For library files in the domain-dir`/lib/applib` directory, only the JAR file name is required, for example:

asadmin> deploy --libraries commons-coll.jar,X1.jar app.ear

For other types of library file, the full path is required.

See Also

You can also view the full syntax and options of the subcommands by typing the command asadmin help deploy at the command line.

To Resynchronize Custom Configuration Files for an Instance

Configuration files in the domain-dir`/config` directory that are resynchronized are resynchronized for the entire domain. If you create a custom configuration file for an instance or a cluster, the custom file is resynchronized only for the instance or cluster.

  1. Place the custom configuration file in the

    domain-dir`/config/`config-name directory.
    domain-dir

    The directory in which the domain’s configuration is stored.

    config-name

    The named configuration that the instance references.

  2. If the instance locates the file through an option of the Java application launcher, update the option.

  3. Delete the option.

asadmin> delete-jvm-options --target instance-name
option-name=current-value
instance-name

The name of the instance for which the custom configuration file is created.

option-name

The name of the option for locating the file.

current-value

The current value of the option for locating the file.

  1. Re-create the option that you deleted in the previous step.

asadmin> create-jvm-options --target instance-name
option-name=new-value
instance-name

The name of the instance for which the custom configuration file is created.

option-name

The name of the option for locating the file.

new-value

The new value of the option for locating the file.

Example 5-17 Updating the Option for Locating a Configuration File

This example updates the option for locating the server.policy file to specify a custom file for the instance pmd.

asadmin> delete-jvm-options --target pmd
-Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy
Deleted 1 option(s)
Command delete-jvm-options executed successfully.
asadmin> create-jvm-options --target pmd
-Djava.security.policy=${com.sun.aas.instanceRoot}/config/pmd-config/server.policy
Created 1 option(s)
Command create-jvm-options executed successfully.

See Also

You can also view the full syntax and options of the subcommands by typing the following commands at the command line.

asadmin help create-jvm-options

asadmin help delete-jvm-options

To Resynchronize Users' Changes to Files

A change to the config/domain.xml file is required to cause the DAS to resynchronize instances' files. If other files in the domain directory are changed without a change to the config/domain.xml file, instances are not resynchronized with these changes.

The following changes are examples of changes to the domain directory without a change to the config/domain.xml file:

  • Adding files to the lib directory

  • Adding certificates to the key store by using the keytool command

    1. Change the last modified time of the config/domain.xml file.
      Exactly how to change the last modified time depends on the operating system. For example, on UNIX and Linux systems, you can use the touch(1) command.

    2. Resynchronize each instance in the domain with the DAS.
      For instructions, see To Resynchronize an Instance and the DAS Online.

See Also

To Resynchronize Additional Configuration Files

By default, GlassFish Server synchronizes only the following configuration files:

  • admin-keyfile

  • cacerts.jks

  • default-web.xml

  • domain.xml

  • domain-passwords

  • keyfile

  • keystore.jks

  • server.policy

  • sun-acc.xml

  • wss-server-config-1.0

  • xml wss-server-config-2.0.xml

If you require instances in a domain to be resynchronized with additional configuration files for the domain, you can specify a list of files to resynchronize.

Caution:

If you specify a list of files to resynchronize, you must specify all the files that the instances require, including the files that GlassFish Server resynchronizes by default. Any file in the instance’s cache that is not in the list is deleted when the instance is resynchronized with the DAS.

In the config directory of the domain, create a plain text file that is named config-files that lists the files to resynchronize.

In the config-files file, list each file name on a separate line.

Example 5-18 config-files File

This example shows the content of a config-files file. This file specifies that the some-other-info file is to be resynchronized in addition to the files that GlassFish Server resynchronizes by default:

admin-keyfile
cacerts.jks
default-web.xml
domain.xml
domain-passwords
keyfile
keystore.jks
server.policy
sun-acc.xml
wss-server-config-1.0.xml
wss-server-config-2.0.xml
some-other-info

To Prevent Deletion of Application-Generated Files

When the DAS resynchronizes an instance’s files, the DAS deletes from the instance’s cache any files that are not listed for resynchronization. If an application creates files in a directory that the DAS resynchronizes, these files are deleted when the DAS resynchronizes an instance with the DAS.

Put the files in a subdirectory under the domain directory that is not defined by GlassFish Server, for example, /export/glassfish3/glassfish/domains/domain1/myapp/myfile.

To Resynchronize an Instance and the DAS Offline

Resynchronizing an instance and the DAS offline updates the instance’s cache without the need for the instance to be able to communicate with the DAS. Offline resynchronization is typically required for the following reasons:

  • To reestablish the instance after an upgrade

  • To synchronize the instance manually with the DAS when the instance cannot contact the DAS

    1. Ensure that the DAS is running.

    2. Export the configuration data that you are resynchronizing to an archive file.

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for exporting the configuration data, see the export-sync-bundle(1) help page.

How to export the data depends on the host from where you run the export-sync-bundle subcommand.

  • From the DAS host, run the export-sync-bundle subcommand as follows:

asadmin> export-sync-bundle --target target
target

The cluster or standalone instance for which to export configuration data.
Do not specify a clustered instance. If you specify a clustered instance, an error occurs. To export configuration data for a clustered instance, specify the name of the cluster of which the instance is a member, not the instance.
The file is created on the DAS host.

  • From the host where the instance resides, run the export-sync-bundle subcommand as follows:

$ asadmin --host das-host [--port admin-port]
export-sync-bundle [--retrieve=true] --target target
das-host

The name of the host where the DAS is running.

admin-port

The HTTP or HTTPS port on which the DAS listens for administration requests. If the DAS listens on the default port for administration requests, you may omit this option.

target

The cluster or standalone instance for which to export configuration data.
Do not specify a clustered instance. If you specify a clustered instance, an error occurs. To export configuration data for a clustered instance, specify the name of the cluster of which the instance is a member, not the instance.

Note:

To create the archive file on the host where the instance resides, set the --retrieve option to true. If you omit this option, the archive file is created on the DAS host.

  1. If necessary, copy the archive file that you created in StepĀ 2 from the DAS host to the host where the instance resides.

  2. From the host where the instance resides, import the instance’s configuration data from the archive file that you created in StepĀ 2.

Note:

Only the options that are required to complete this task are provided in this step. For information about all the options for importing the configuration data, see the import-sync-bundle(1) help page.

$ asadmin import-sync-bundle [--node node-name] --instance instance-name archive-file
node-name

The node on which the instance resides. If you omit this option, the subcommand determines the node from the DAS configuration in the archive file.

instance-name

The name of the instance that you are resynchronizing.

archive-file

The name of the file, including the path, that contains the archive file to import.

Example 5-19 Resynchronizing an Instance and the DAS Offline

This example resynchronizes the clustered instance yml-i1 and the DAS offline. The instance is a member of the cluster ymlcluster. The archive file that contains the instance’s configuration data is created on the host where the instance resides.

$ asadmin --host dashost.example.com
export-sync-bundle --retrieve=true --target ymlcluster
Command export-sync-bundle executed successfully.
$ asadmin import-sync-bundle --node sj01
--instance yml-i1 ymlcluster-sync-bundle.zip
Command import-sync-bundle executed successfully.

See Also

You can also view the full syntax and options of the subcommands by typing the following commands at the command line.

asadmin help export-sync-bundle

asadmin help import-sync-bundle

Migrating EJB Timers

If a GlassFish Server server instance stops or fails abnormally, it may be desirable to migrate the EJB timers defined for that stopped server instance to another running server instance.

Automatic timer migration is enabled by default for clustered server instances that are stopped normally. Automatic timer migration can also be enabled to handle clustered server instance crashes. In addition, timers can be migrated manually for stopped or crashed server instances.

To Enable Automatic EJB Timer Migration for Failed Clustered Instances

Automatic migration of EJB timers is enabled by default for clustered server instances that are stopped normally. If the Group Management Service (GMS) is enabled and a clustered instance is stopped normally, no further action is required for timer migration to occur. The procedure in this section is only necessary if you want to enable automatic timer migration for clustered server instances that have stopped abnormally.

Note:

If the GMS is enabled, the default automatic timer migration cannot be disabled. To disable automatic timer migration, you must first disable the GMS. For information about the GMS, see Group Management Service.

Before You Begin

Automatic EJB timer migration can only be configured for clustered server instances. Automatic timer migration is not possible for standalone server instances.

Enable delegated transaction recovery for the cluster.

This enables automatic timer migration for failed server instances in the cluster.

For instructions on enabling delegated transaction recovery, see "Administering Transactions" in GlassFish Server Open Source Edition Administration Guide.

To Migrate EJB Timers Manually

EJB timers can be migrated manually from a stopped source instance to a specified target instance in the same cluster if GMS notification is not enabled. If no target instance is specified, the DAS will attempt to find a suitable server instance. A migration notification will then be sent to the selected target server instance.

Note the following restrictions:

  • If the source instance is part of a cluster, then the target instance must also be part of that same cluster.

  • It is not possible to migrate timers from a standalone instance to a clustered instance, or from one cluster to another cluster.

  • It is not possible to migrate timers from one standalone instance to another standalone instance.

  • All EJB timers defined for a given instance are migrated with this procedure. It is not possible to migrate individual timers.

Before You Begin

The server instance from which the EJB timers are to be migrated should not be active during the migration process.

  1. Verify that the source clustered server instance from which the EJB timers are to be migrated is not currently running.

asadmin> list-instances source-instance
  1. Stop the instance from which the timers are to be migrated, if that instance is still running.

asadmin> stop-instance source-instance

Note:

The target instance to which the timers will be migrated should be running.

  1. List the currently defined EJB timers on the source instance, if desired.

asadmin> list-timers source-cluster
  1. Migrate the timers from the stopped source instance to the target instance.

asadmin> migrate-timers --target target-instance source-instance

Example 5-20 Migrating an EJB Timer

The following example show how to migrate timers from a clustered source instance named football to a clustered target instance named soccer.

asadmin> migrate-timers --target soccer football

See Also


Previous Next Contents
Eclipse Foundation Logo  Copyright © 2019, Oracle and/or its affiliates. All rights reserved.