update-node-ssh

Previous Next Contents

update-node-ssh

updates the configuration data of a node

Synopsis

asadmin [asadmin-options] update-node-ssh [--help]
[--nodehost node-host]
[--installdir as-install-parent] [--nodedir node-dir]
[--sshport ssh-port] [--sshuser ssh-user]
[--sshkeyfile ssh-keyfile]
[--force={false|true}]
node-name

Description

The update-node-ssh subcommand updates the configuration data of a node. This subcommand requires secure shell (SSH) to be configured on the machine where the domain administration server (DAS) is running and on the machine where the node resides. You may run this subcommand from any machine that can contact the DAS.

This subcommand can update any node, regardless of whether the node is enabled for remote communication. If the node is not enabled for remote communication, the subcommand enables SSH communication for the node and updates any other specified configuration data.

Options of this subcommand specify the new values of the node’s configuration data. The default for most options is to leave the existing value unchanged. However, if this subcommand is run to enable SSH communication for a node, default values are applied if any of the following options is omitted:

  • --sshport

  • --sshuser

  • --sshkeyfile

By default, the subcommand fails and the node is not updated if the DAS cannot contact the node’s host through SSH. To force the node to be updated even if the host cannot be contacted through SSH, set the --force option to true.

This subcommand is supported in remote mode only.

Options

asadmin-options

Options for the asadmin utility. For information about these options, see the asadmin(1M) help page.

--help
-?

Displays the help text for the subcommand.

--nodehost

The name of the host that the node is to represent after the node is updated.

--installdir

The full path to the parent of the base installation directory of the \{product---name} software on the host, for example, /export/glassfish3.

--nodedir

The path to the directory that is to contain \{product---name} instances that are created on the node. If a relative path is specified, the path is relative to the as-install directory, where as-install is the base installation directory of the \{product---name} software on the host.

--sshport

The port to use for SSH connections to this node’s host. The default depends on whether this subcommand is run to enable SSH communication for the node:

  • If the node is already enabled for communication over SSH, the default is to leave the port unchanged.

  • If this subcommand is run to enable SSH communication for the node, the default port is 22.
    If the --nodehost is set to localhost, the --sshport option is ignored.

--sshuser

The user on this node’s host that is to run the process for connecting to the host through SSH. The default depends on whether this subcommand is run to enable SSH communication for the node:

  • If the node is already enabled for communication over SSH, the default is to leave the user unchanged.

  • If this subcommand is run to enable SSH communication for the node, the default is the user that is running the DAS process.
    If the --nodehost option is set to localhost, the --sshuser option is ignored.

--sshkeyfile

The absolute path to the SSH private key file for user that the --sshuser option specifies. This file is used for authentication to the sshd daemon on the node’s host.

Note:

\{product---name} also supports password authentication through the AS_ADMIN_SSHPASSWORD entry in the password file. The password file is specified in the --paswordfile option of the asadmin(1M) utility.

  If the SSH private key file is protected by a passphrase, the password
  file must contain the `AS_ADMIN_SSHKEYPASSPHRASE` entry. +
  The path to the key file must be reachable by the DAS and the key file
  must be readable by the DAS. +
  The default depends on whether this subcommand is run to enable SSH
  communication for the node: +
  * If the node is already enabled for communication over SSH, the
  default is to leave the key file unchanged.
  * If this subcommand is run to enable SSH communication for the node,
  the default is the key file in the user's `.ssh` directory. If
  multiple key files are found, the subcommand uses the following order
  of preference:
  1.  `id_rsa`
  2.  `id_dsa`
  3.  `identity`
`--force`::
  Specifies whether the node is updated even if validation of the node's
  parameters fails. To validate a node's parameters, the DAS must be
  able to contact the node's host through SSH. Possible values are as
  follows: +
  `false`;;
    The node is not updated if validation of the node's parameters fails
    (default).
  `true`;;
    The node is updated even if validation of the node's parameters
    fails.

Operands

node-name

The name of the node to update. The node must exist. Otherwise, an error occurs.

Examples

Example 1   Updating the Host That a Node Represents

This example updates the host that the node lssh represents to sj04.

asadmin> update-node-ssh --nodehost sj04 lssh
Command update-node-ssh executed successfully.

Example 2   Forcing the Update of a Node

This example forces the update of the node sj01 to enable the node to communicate over SSH.

asadmin> update-node-ssh --force sj01
Warning: some parameters appear to be invalid.
Could not connect to host sj01 using SSH.
Could not authenticate. Tried authenticating with specified key at
/home/gfuser/.ssh/id_rsa
Continuing with node update due to use of --force.
Command update-node-ssh executed successfully.

Exit Status

0

command executed successfully

1

error in executing the command

See Also


Previous Next Contents
Eclipse Foundation Logo  Copyright © 2019, Oracle and/or its affiliates. All rights reserved.