start-local-instance

Previous Next Contents

start-local-instance

starts a \{product---name} instance on the host where the subcommand is run

Synopsis

asadmin [asadmin-options] start-local-instance [--help]
[--nodedir node-dir] [--node node]
[--debug={false|true}] [--dry-run={true|false}]
[--sync={normal|full|none}]
[--verbose={false|true}] [--watchdog={true|false}]
[instance-name]

Description

The start-local-instance subcommand starts a \{product---name} instance on the host where the subcommand is run. This subcommand does not require the Distributed Component Object Model (DCOM) remote protocol or secure shell (SSH) to be configured. You must run this command from the host where the instance resides.

The subcommand can start any \{product---name} instance, regardless of how the instance was created. For example, this subcommand can start an instance that was created by using the create-instance(1) subcommand.

The start-local-instance subcommand does not contact the domain administration server (DAS) to determine the node on which the instance resides. To determine the node on which the instance resides, the subcommand searches the directory that contains the node directories. If multiple node directories exist, the node must be specified as an option of the subcommand.

This subcommand is supported in local mode. However, to synchronize the instance with the DAS, this subcommand must be run in remote mode.

Options

asadmin-options

Options for the asadmin utility. For information about these options, see the asadmin(1M) help page.

--help
-?

Displays the help text for the subcommand.

--nodedir

Specifies the directory that contains the instance’s node directory. The instance’s files are stored in the instance’s node directory. The default is as-install`/nodes`.

--node

Specifies the node on which the instance resides. This option may be omitted only if the directory that the --nodedir option specifies contains only one node directory. Otherwise, this option is required.

--debug
-d

Specifies whether the instance is started with Java Platform Debugger Architecture (JPDA) (http://www.oracle.com/technetwork/java/javase/tech/jpda-141715.html) debugging enabled.
Possible values are as follows:

true

The instance is started with JPDA debugging enabled and the port number for JPDA debugging is displayed.

false

The instance is started with JPDA debugging disabled (default).

--dry-run
-n

Suppresses actual starting of the instance. Instead, start-local-instance displays the full command that would be used to start the instance, including all options. Reviewing this command can be useful when troubleshooting startup issues.
The default value is false.

--sync

The type of synchronization between the DAS and the instance’s files when the instance is started.
Possible values are as follows:

none

The DAS does not synchronize the instance’s files with any changes. This type of synchronization minimizes the time that is required to start the instance.

normal

The DAS synchronizes the instance with changes since the last synchronization as follows:

  • For the config directory, the DAS synchronizes the instance with all changes.

  • For the applications directory and docroot directory, only a change to a top-level subdirectory causes the DAS to synchronize all files under that subdirectory.
    If a file below a top level subdirectory is changed without a change to a file in the top level subdirectory, full synchronization is required. In normal operation, files below the top level subdirectories of these directories are not changed. If an application is deployed and undeployed, full synchronization is not necessary to update the instance with the change.
    This value is the default.

full

The DAS synchronizes the instance with all of the instance’s files, regardless of whether the files have changed since the last synchronization. This type of synchronization might delay the startup of the instance while the DAS updates all files in the instance’s directories.

Caution:

If the DAS is not running or is unreachable from the host where you are running this subcommand, do not set the --sync option to full. To perform a full synchronization, the subcommand removes the instance’s cache. If the DAS cannot be contacted to replace the cache, the subcommand fails and the instance cannot be restarted until it is resynchronized with the DAS.

--verbose
-v

Specifies whether detailed information about the instance is displayed in the console window where the subcommand is run.
Possible values are as follows:

true

Detailed startup messages and log messages about the instance are displayed in the console window where the subcommand is run. If the instance is later restarted by running the restart-local-instance(1) subcommand from a different console window, messages continue to be displayed in the original console window.
You can kill the \{product---name} process by typing CTRL-C in the console window.
You can kill the \{product---name} process and obtain a thread dump for the server by typing one of the following key combinations in the console window:

  • CTRL-\ on UNIX systems

  • CTRL-Break on Windows systems

false

Detailed information is not displayed (default).

--watchdog
-w

Specifies whether limited information about the instance is displayed in the console window where the subcommand is run. The --watchdog option is similar to --verbose but does not display the detailed startup messages and log messages. This option is useful when running the asadmin utility in the background or with no attached console.
Possible values are as follows:

true

Limited information is displayed in the console window.

false

Limited information is not displayed in the console window (default).

Operands

instance-name

The name of the instance to start.

Examples

Example 1   Starting an Instance Locally

This example starts the instance yml-i-sj01 on the host where the subcommand is run.

asadmin> start-local-instance --node sj01 yml-i-sj01
Waiting for the server to start .................................
Successfully started the instance: yml-i-sj01
instance Location: /export/glassfish3/glassfish/nodes/sj01/yml-i-sj01
Log File: /export/glassfish3/glassfish/nodes/sj01/yml-i-sj01/logs/server.log
Admin Port: 24849
Command start-local-instance executed successfully.

Exit Status

0

command executed successfully

1

error in executing the command

See Also

Java Platform Debugger Architecture (JPDA) (http://www.oracle.com/technetwork/java/javase/tech/jpda-141715.html)


Previous Next Contents
Eclipse Foundation Logo  Copyright © 2019, Oracle and/or its affiliates. All rights reserved.